no, you must use an original Konica SD
bye
Type: Posts; User: rolls.bo
no, you must use an original Konica SD
bye
hello, change SSD and follow the technical procedure to follow.
If you are not a Konica certified technician on this model, do nothing and call a trained technician.
The SSD disk is not a common...
in the C3350i and C4050i models it happens very often that the transfer belt exhaust system gets clogged and starts making these types of noises until it goes out of code.
Clean the exhaust system...
hi, yes you are right, but on the new Series-I things have improved a lot, it works very well
byeee
To install the I-Option modules you need additional memory called UK-204.
I recommend LK 110 and not LK-105
LK-110 is more complete
bye
hello , I am a km/develop certified technician and I confirm that the machines are the same, such as the drums, development groups, fusion group and firmware.
Change the printer drivers that must be...
hello everyone, do you know if there is a Software Switch to make a printer no longer usable?
I have printers to be scrapped and I want to make sure they are no longer usable
bye ......
bye bye
Yes i toner of the black model c3320i you can mount it on c3350i but you have to remove a small stop that prevents it from being mounted. You find it behind the cartridge at the top.
bye bye
Hello everyone, I would like to give some advice on:
I use free third-party software to run the operating system image. Not all software is able to make a copy of the disk, since the disk has...
I am attaching a file that I made to simplify the installations, since I install MFP every day
I hope it can help
develop = konicaminolta
ineo = bizhub
ineo + ..... = bizhub c ....
you're right I think like you.
in the c3350i series, with early firmware there was this problem of high toner waste, but here I believe there is an electronic or sensor problem not working properly.
yes the temperature sensor .............. if in:
Service Mode / State confirmation / Temp / Humidity / Atmospheric pressure.
the temperature is zero replace the temperature sensor
search BT2012139EN I don't have the English version but in Italian.
The document talks about the problem with the temperature sensor that can give various problems, maybe it can concern you
in Italy the new c257i was presented this week, it seems to be more performing than the old c227
6 gb of ram
ssd disk
processor same as c250i series
we'll see...............
Hi everyone, I recommend updating the FW, here in Italy the E9 version is available, certainly not bad
I have installed version 7B and it works fine. On the Knova portal I remember that it is one of the last
good you wrote right .......... he is the same firmware
Firmware is the same for all brands but the model must be the same. Never change the soft switch 10, because the certificate settings change
look for this driver AA2J0Y0-A521-G00-00 maybe it's for you
bye
Yes, it is possible.
if you download the driver from the Konica site inside you will find driver and pdf with instructions to install it and use account track
bye from Italy
WARNING ! If you do not perform the EFI 1-18LDJR Patch on the IC-413, the CONTROLLER button will not be displayed on the 6000 or 6000L LCD Display, so you will not be able to assign the correct IP...
guys, experience teaches, for this reason I don't like universal drivers ......
mi viene da pensare che ci siano attive le autentificazioni con utente pubblico attivo solo per la funzione scanner
se vuoi delle risposte devi allegare la lista di gestione macchina, solo cosė ti...
Firmware for Function Version 4.2 Version ver.Gxx-U8/V1/W5.
About Software Switch Settings
Switch No.: 25
HEX Assignment: B0 -> Function Version 4.2
this Software Switch enable version...