Hi
Thanks for the reply. We actually have just changed the complete right hand side door from another machine but still the same issue. Running out of ideas on this one:)
Type: Posts; User: tbsl
Hi
Thanks for the reply. We actually have just changed the complete right hand side door from another machine but still the same issue. Running out of ideas on this one:)
Hi
I have a weird problem that has stumped a few engineers here. The image below shows at the top of each page these four marks as highlighted. We have changed drums, fuser, belt, devs but to no...
Thanks for the reply. We changed the fuser gear from the old to the new and the noise is slightly better but not really acceptable to us. Not really sure what else to do as we have changed 2 fusers...
Hi
We initially replaced a fixing unit in a Canon MF428X due to it having marks on it and therefore ordered a new one. However once fitted the copier makes a loudish sound coimg from the back so...
Hi
We have one of these MFP's in the workshop and can't seem to work out what the issue is. We have tried a couple of toners but it still won't recognise it.
Unfortunately we can't seem to get...
thanks for all the replies. Due to the corona virus issue another engineer took this job on and replaced the DC controller and it fixed the issue. Not sure how/why but at least it's fixed:)
Thanks for your response. We have changed the drum and swapped the following parts from a donor machine:-
Main controller, ITB ,DC controller, HVT high and low voltage
Bit stumped with this...
Hi
We have had an ongoing issue which we have been unable to solve.(see attached pics). Originally we thought it was the laser so we changed the laser, no change. On canons advice we change the...
Hi
Have a bit of an odd on whereby the printed/copied image is faded down the left side for about 2inches across and then all down that side of the page, Have replaced all drums & ITB belt but no...
thanks for the responses. we have changed the drum but now we have blank copies. we have removed the drum and reseated the cable as per earlier reply
Any ideas?
Hi
Have a weird one where the printer only prints about a 6th of the page. Have attached the issue.
Have replaced drum,works ok for a while and then begins printing part of the page only
...
FYI I have 'fixed' the issue with the IR3225's as I cloned a working drive onto another generic drive and it now works ok
Hi
Once again I appreciate the time taken to reply.
I probably should have stated that we are a canon dealer with an IT dept so my guys are quite technical. They have used drives with the same...
Thanks for that. Are you saying that the IR3225 series are different to the IR3025 or IR5065/75 series as we have been successful in putting old computer laptop drives in them albeit using the...
Hi teckat
Thanks for the response.
What I'm after is the hard drive make/model eg. Canon WM2-5216-000: Hitachi 20gig - HTS541020G9AT00
TIA
TBSL
Don't suppose anyone can give all/some of the hard drive make/model numbers that fit the IR3225 series?
TIA
TBSL