That PG-10 test print looks pretty bad.
No black at all - check the black drum and especially the black developing assm (It may have broken drive piece on the rear side). This may be causing the...
Type: Posts; User: ReproKev
That PG-10 test print looks pretty bad.
No black at all - check the black drum and especially the black developing assm (It may have broken drive piece on the rear side). This may be causing the...
If you're using Gmail or AOL email servers, you need to generate an "App password" for each device (copier) that is set up to use the email server.
The stapler guide plate was bent causing it to hang up. I was able to reform it to get it to work for now, but I ordered a new updated guide that's in a service bulletin I found.
57266
Thanks. I'll look it over when I get back there later today.
After stapling, the stapler tries to move back to home position, but hits another piece inside near the rear, makes gear noises and gives code e532-8002. I was able to insert a long screwdriver in...
Follow up - Customer has been printnet, which works with no problems. We also found the setting "wake on LAN" (or something similar), turned that on, and it it seems to be working well from Adobe...
Jams very often, but not every set. Mostly jam code 0045, but occasionally an 003 or 005 jam happens.This machine has only 78k on it and is in a very clean lawyers office with standard office temp...
I didn't realize that. I'll let my customer know. Thanks!
Does the firmware version in the pic I posted above look like it needs updating? If so, any idea where I can get it from?
I believe they are printing from both Acrobat Pro and Acrobat reader (free download version), depending on what they have open at the time.
Customer has a "new to him" Kip 7170 that occasionally doesn't print the pdf he sent. When I look at the job list is shows the job, but instead of saying "printing" it says "coasting" and just sits...
From the service manual:
E260-0440-05 Power supply error
Detection Description The 24 V supply to the Developing Stirring Motor was not detected. (Blowout of FU6 and 7 on the
Developing Assembly...
The laser glass cleaning wand on that model never worked well for me.
If you still have light/dark streaks after replacing the drums, remove the laser assm from the left side of the machine and...
Could be wrong type of paper is selected either at the computer, or the copier - plain/heavy/envelope, etc.
The settings at the machine need to match what you select in the print driver on the...
That took care of it. Thanks.
I wonder why I never ran into that before? I've always just used 7654321 in both fields with no problems.
Can't get past admin user name and password.
I've upgraded firmware through service mode updater. Did a PWD-CLR and MMI clear in service mode multiple times (before and after firmware update) - no...
Thanks for the part numbers.
I'm just trying to keep this customer running for a few more months until they're ready to upgrade.
They are billable so maybe i should just order the whole...
Are cassette paper feed rollers available for this model or do I need to order the whole paper feed assembly?
Looking in the parts manual and searching online, I can only find the whole feed...
Looks like there's still a white blank area around all 4 sides and the banding is only in the image area....that tells me it's more likely a software side problem (firmware, drivers, main controller)...
Follow up: Couldn't have been easier! I replaced the HDD and when I turned on the power, it started printing jobs from the customers print driver queue that they never deleted. I didn't even need to...
Not sure if it would work, but you can try installing it in the 8105, then format it and load system software as if it was a new HDD.
Sounds like an easy install. Thanks for the information.👍🏻
I'm not 100% sure, but I think the wireless credentials do get transferred. I know all the passwords for scanning to file and email credentials get carried over. I just did an install last week and...
I normally work on Canon's and have replaced many hard drives and loaded/upgraded system software, but have never done it on a Kyocera.
The copier has a code 0640 that happened at least twice so...
Anyone have a working hopper for a Canon IRA-8085? Part #FM4-9813. New or used is OK. Apparently they've been discontinued.
Follow up:
Never did get a chance to put parts in that machine. The customer ended up making an insurance claim on it along with some other equipment that was damaged.