Replace drum section, that should take care of it.
Type: Posts; User: Practic
Replace drum section, that should take care of it.
I replaced drum unit on a day before (cause there was squealing noise from it) and I checked it this time to be sure that sensor is clean too.
Thanks!
Hi!
Sorry for posting it here but I'm wondering what was cure in your case. I'm having same j031 codes with SP5300. Since it's not "Ricoh-Ricoh" machine we can't just test sensors with 5803 cause...
Hello!
Nope we couldn't fix that machine unfortunately. I played a lot with pressure for pickup roller and adjustments for separation pad - seems like found some sort of solution - but every 50...
Hello Everybody!
Can't figure it out what could be the problem - paper seems always stop under the drum with this jam code Jam 04. In log sheet appears code A08-410. Manual refers to late arrival of...
Anyways... It turned out that service mode was disabled when machine was preflighted by Ricoh proir to get delivered on site (as per policy of company where that printer was installed). I didn't do...
Hello Everybody!
Couldn’t find info in SM how to get into Service mode - it just saying to check with supervisor. Sequence Up+down and then OK button seems not working.
Any info would be...
Yes please and thank you!
Hello everybody! Looking for advice.
Just spent 3 hours trying to figure where squeak is coming from. First time I thought - was a fuser issue or paper exit area behind fuser, so I lubed gears there...
Update.
Bulletin was re-issued recently and PN has been changed.
43896
Hi all!
Confirming that. LCD and touch screen assembled as all-in-one piece at this model and has part number D1271473. But I found that number on touch itself (check photos)
4318543184
google...
Don't have any Kyoceras of that type - in field to check that theory :(, can only make some pictures and compare to some other pictures... Usually all Kyocera stuff has 302....... and FK-.... in...
4298042981
It is cheaper option indeed!
Thanks everyone!
It's not just one machine but small fleet of SP5300 and MP501s. Roughly - meter counts on those between 150 and 200k at the moment.
Hi!
Just wondering... If we could only replace just upper heat roller on that (Ricoh/Kyocera) platform without changing whole unit. Does anyone had positive experience with compatible heat rollers...
Just had conversation with tech support, and they mentioned that B8021931 (Timing Pulley:T33-Z17) - according to discription may have 2 gears on one shaft and that's what I need, but I'll order...
42749
That's the one in the middle. it moves freely and there is a tiny crack in it.
Good day!
Have got that error, but can't locate right part on catalog to replace that cracked gear in feeder drive section. As far as I see it should be right next to gear 17 which is B8021931...
Hi all!
Got same issue with Ricoh MP 501 (different label, same machine) and with help of college found - that issue was with hinges, same symptoms: clear paper path and paper just can't get curled...
Hello!
Not Quite got the idea. Is that switch with parallel port onboard? Can you use regular patch-cord cable to connect your PC with switch and from switch to FIERY? I can be wrong but just...
Hey innokileo, what are first 3 letters of your serial number on machine? Where that device locally? And - is there any chance that you can find what version of firmware there was before?
I have been trying just to reflash firmware, but as I remember now - there is some sort of special download mode (when you holding some sequence of buttons while switching main power on), when device...
38741
Here is what you can do. That helped me once.
You need to get to mainboard and find there flash memory. In my case it was chip - 25Q64BVFIG. It contains firmware for that machine.
Then -...
Is it recognized by computer via USB?
What's happened from customer`s words?
Hello!
I can suggest you to try 675756 to go service mode, if software on machine is somehow related with PRISMAsync software. Just guessing. But it's really looks like Minolta though.
Good luck!