Reset NCS or Telnet - access flush. Maybe access control is enabled on the device that is why you were not able to browse it.
For the CAC messages, once inside extended features in web browser,...
Type: Posts; User: keithxxiii
Reset NCS or Telnet - access flush. Maybe access control is enabled on the device that is why you were not able to browse it.
For the CAC messages, once inside extended features in web browser,...
The strange thing is that the machine comes with introductory toner which yields around 2K maybe?
Then we replaced the toner 3 times but after the third one, it is asking again. The current total...
Hello All,
I am new into sharp mfps' hardware parts. Mostly I have done software installations for sharp mfp.
We have this BP20M22 on site. We have issued a toner BPFT201 which according to...
Different sizes, different brands. I had to use the sdcard formatter tool as well, different usb drives, none of these worked.
But when skip LR check was enabled, and package_01 loaded, it worked. ...
I think I am wrong on this one. My suggestion above is for IMC series only. My colleague called me up for an 04 series machine but couldn't find the package_01 firmware
Use package_01in an sd card. Set 5886-02 to 1.
This should update the firmware and put you back to using RFUT in the future
Can't define what is LR, but it is under 5886
Hey guys,
Forgot to update you. the software messes up with the sp modes and firmware.
need to disable skip lr check from sp mode then proceed with the firmware update.
works like charm
Printer VLAN does not have internet connectivity. Only the @remote URLs are the ones permitted.
Thanks for this, I have it extracted and will test with the client.
60301
I need to try RFU thru WIM but then I have to upload 600+MB file to the printer. Knowing browsers now don't show the status of the progress while uploading, this might pose a challenge.
I also...
Hello,
We have these 50+ number of machines IM C2500/3500/3000 series all connected to a print management called MyQ.
All of them were installed more than a year ago with their stock firmwares....
how about DMNX Lite from ricoh?
If I may suggest, review your configuration on the device configuration utility.
Isolate 2-3 machines having issues.
Update firmware
Create a new profile - uninstall the embedded
Install and...
We had 2 cases of MPW6700 CIS failing after just few months of installation and use. Now wondering maybe there is an issue with the production of those?
Go for an IM C300, it is packed with ACT. You can update the firmware by yourself
It was default to Driver/Command, it also prints but the printer throws up an error afterwards.
The model we are having is P501 in replacement of an HP printer. Tried whatever settings from an HP...
Hello Team,
I just want to know if there is a setting from the bypass tray that ignores the size of the loaded paper.
The current scenario: Customer has a software to print cheque. The image...
Thanks @Luca, I will try to outsource some contact cleaners and spray them. Maybe the humidity in the middle east is a big factor why this boards fail.
Ricoh had a good profit margin on those boards.
I had 1 IMC5500, 2 MPC5504, a couple of 3004s in the last 2 months all of them worked fine when controller was replaced.
I did all the POST Codes...
Hello to all gurus out there,
I noticed a number of SC672-XX calls on the field. Ricoh has a procedure on the service manual how to diagnose it but everything points out to the controller.
Is...
Griffin Series are PITA if it bugs down. Anyway, opened one today because of toner spills. The assembly that holds the toners Y and M are full of hardened toner. Had to open all stuff from the back....
Did you manage to fix this issue? How about removing the whole driver package from the driver repository and reinstall. Or clear the NCS setting?
Had 2 previous clients using pharos + hp devices. Seems easy to manage but lacks features that young managers require. "Charts and reports"
PrinterOn - not so popular in our region. Maybe in a small...
try adjusting the security level of the machine