Search:

Why don't you set the machine to an fixed IP???

Did you follow the steps in de service manual?

Did you do the SP modes?

My guess is that you didn't poor out all the old developer and didn't clean the development roller sleeve and shaft,...

Second that, also take a look at the cyaan drum life. But first check the ITB cleaning as stated.

Second that, totally didn't expect to solve the print quality problem with changing the function version.

And to be honest I wouldn't believe it if I hadn't seen it with my own eyes. <= That's...

No props, that's correct.

Machine was on sw25 hex 30 prior to the problem (and with the problem). Changing sw25 to hex 10 solved the problem. After this... set sw 25 to hex 30 problem stays fixed.

- It was an new machine (1,5 week onsite at the customer).
So counters were near 0.
- My hypothesis is (since IT of the customer didn't changed to the new driver yet), that the machine got in this...

Hi,

This week we had an interesting case with a Konica Minolta Bizhub C550i (machine with memoryboard)...

The customer compliant about color copies, as there was an dotted pattern as background...

Need a Canon Fiery X3IM-4VX5-bb (Fiery controller for the Canon ImagePress C1 Series)?

I have a used one for sale.

Interested? PM me!

In case of offset, change these sp modes:

SP1 112 002, from -10 to => 0
SP1 101 010 , 55 => 0
SP1 101 014 , 55 => 0
SP1 101 022 , 55 => 0
SP1 101 026 , 55 => 0
SP1 101 107 , 55 => 0
SP1 101...

All our machines run service to service ;) . I love it when a machine runs pm to pm :cool:

***SOLVED***

Replacing the SD-511 pwb (A3ERP6J01) solved the problem.

https://db.tt/ws8qh0wf
My documentation only makes notice of C9403 or C9404, guess C9401, is also possible...

Sorry, it turns out, I've given you the wrong information :mad:, the information provided is valid for C models (my mistake, sorry for that). The BH654e has another ccd cable...

Defective memory?

Try (re)writing firmware to the machine... Perform a memory check (under state confirmation in service mode).

Two possible causes:
1) Damage to the CCD flat-cable by the spring plate (V500020069 Clamp, A161N14401 CCD cable);
2) Select the right type when writing firmware.

Hi everybody,

We have a Konica Minolta BH C284e with a FS-534 and a SD-511 in the field. This machine is having a problem (probably related to the SD-511).

With all doors and covers of the...

Nothing 'new' to R6 firmware...

Please state the release notes.

Best Regards,

Mr. Breaker