UPDATE........Fairly new. i think 80k on it. We removed it and put another brand new one on and customer has had no issues. We did however bring it back to the shop and ran THOUSANDS through it and...
Type: Posts; User: bigdaddyooo
UPDATE........Fairly new. i think 80k on it. We removed it and put another brand new one on and customer has had no issues. We did however bring it back to the shop and ran THOUSANDS through it and...
The BP DSPF uses a different white ref chart than the MX's. Make sure you have the correct one
Steve our rep advised us to NOT clone machines any longer. They are seeing a lot of problems with lock up, slow networking etc... if you saw the webinar last week he took a lot of time on this bullet...
We have an LC10 that jams for no reason it seems. Took it back to the shop and ran a few thousand with NO jams. Has anyone had any problems with this unit? Codes are LPFD_NL and SL
Anyone ever have to adjust the skew of 11x17 after saddle stitch has taken place? When you look at the folded print, the top line of paper doesn't line up at the open end. TYIA
Has anyone experienced 1 part of a print not fusing? It's on the rear side of a copy or print. I've torn the fuser apart and found nothing that I can see that would cause it.
Print gets declined now after installing Apple OS-17. Customer uses user codes which get declined now. Any ideas? OBTW an Iphone with OS16 or less works fine.
Did you replace the 560TU or the entire unit? It has a sensor just under the roller that goes kooky once in a while and will cause issues like that.
There is another post about this with a bulletin from Germany and is not here in the states.
I was told by brother that this part is NLA. great...Im SOL. lol
Customer put new waste unit in but damage had been done. I need to know if that black coupler is included when ordering the drive unit. The coupler and the gear are mashed up. TYIA
So it was the TC pwb. the original one has an inherent issue as it was sent to Hytec for repair but still displays phenomenon. We ordered a new TC pwb and returned the machine to the field and its...
I've had a few instances where my 46-74 would give errors and 99% of the time it was the DV concentration wasn't good enough causing calibration errors. Maybe swap DV units just to get to see if it...
ok I said we sent the pwb to Hytec and they repaired it. NO it's really not repaired because I swapped out the TC pwb with one from a brand new machine I'm setting up and ran about 500 dbl sided....
Had the TC pwb repaired and ran about 200 after I installed it. BLUE LINES AGAIN!!!!!! Im pissed. Back to square 1.
Well for shites and grins I tried the TC pwb. VIOLA, fixed and hasn't come back. My DSS says I wouldn't have even thought about that. I did it as this is the only board besides the MFP and PCU I...
I have. 5 FN11's installed and 3 had F1-22 shortly after install. It's maddening. Then I ask Steve...hey have you heard anything on the FN11's? NOPE...wtf
Has anyone experienced random blue lines top to bottom, even in voided area's. on any machines? It seems to be an electrical issue. Both machines in different parts of town (same company) had a...
This was the 1st thing i checked.
UPDATE the loaner never malfunctioned until we went back with the customers machine. It then also couldn't receive. so 2 FX15's plus a loaner wouldn't work in...
I brought the machine back to the shop and used it for 3 days. Never malfunctioned. Dozens of sends and receives. I bring it back to customer and 1st 2 incoming I get an NG0000000 any ideas? YES i...
I'm having an issue when turning machine on. if I move the 1st cis it will come back to home but then the motor keeps going causing a chattering noise. I removed the top and and can not for the life...
[I have found 2 MFP-pwb with broken red Msata connections. If you push that red wire down it will break the little "shelf" on the MFP pwb. It then doesn't have a good connection from the HDD hence...
I started getting 1/2 yellow from top to bottom so for shits and giggles I replaced the LSU unit and VIOLA....fixed. Thank you guys for the suggestions
Drum is coated with yellow toner when doing a 64-1 pattern 9. I have no transfer from drum to TC1. I have replaced MFP pwb, PCU pwb, TC pwb and TC1 unit. Still having the issue. I swapped Y and M...
Sir, that is for the BP-NV70BA.........I need the BP-NV700