I used to get 24 volt power out from the power source board on the old Kyocera 4050/5050 to power a coin op.
Is there a way to do the same on a Bizhub? I know a transformer is better, but people...
Type: Posts; User: patrickjlc
I used to get 24 volt power out from the power source board on the old Kyocera 4050/5050 to power a coin op.
Is there a way to do the same on a Bizhub? I know a transformer is better, but people...
No, even going to service mode, and unset vendor mode, undo the function management on security settings, and still nothing shows. Phone line works, i took a phone and i can hear a dial tone.
I...
Yes, it has a HDD. I did a hdd format with new firmware to see if it would show all the prompts after trying all the options.
Sent from my motorola one 5G UW using Tapatalk
I have a 364e machine tajt I added a fax to it, did all the setup and initialization, but when going to the fax page on admin mode, I only get the #5 prompt.
No matter if I reinstall it, a new one,...
Have you tried adjusting the paper guides? If they move a little it can change from A4 to letter or from letter to A4. Try putting screws on the guide, or change paper orientstion from ñandscape to...
Check developer and main corona. Yiu can vacuum the developer anf run sym u130. For corona remove the grid and clean with some fantastic or similar the wire. Also clean optics.
If tou can post a...
Or 5000/5000
There is a way to change the password if you go into security settings
Sent from my motorola one 5G UW using Tapatalk
Admin/Admin or 3500/3500
Sent from my motorola one 5G UW using Tapatalk
Maybe is the Katun toner Minolta bought agter their factory fires...
Sent from my motorola one 5G UW using Tapatalk
Yep [emoji85]
Sent from my motorola one 5G UW using Tapatalk
Only thing that will not work from a 284 and 364 into a 454e is the paper feed unit.
Drum/developer/ transfer belt are interchangeable.
Sent from my motorola one 5G UW using Tapatalk
I had the same problem, and checking the counter it was 0, and everything on the machine needed to be initialized. If you touch the exclamation point it should list everything that the machine has...
Does the developer feels empty? Compared by weight to say the C, M, or Y? Stick a magnetic screwdriver into the waste toner box and see if the is metallic powder attached.
If yes, start ordering a...
Hello, have a 454e with 455k and have a developer issue. Copies very faint and I changed drum and developer and prints came back perfect. Now less than a week later issue is back.
Consumable life...
Thanks KingArthur and TSBservice, did life stop off and administrator unlocking and machine is back in action.
Will do it to all the machines I have in stores.
Thanks again for the help
...
I know it is an older machine, but has very low count, only 123k.
My issue is put paper on DF or glass and the scanner will move like normal, and that is it.
When I got to Job List it shows status...
Same thing we do, we supply them with the machine, paper, and supplies for free and charge the customer by the copy, usually 5c each. We dont live them extra toner just in case they dont pay. If they...
I have done that on a pinch for black toner on a color machine, use toner powder from a 364e or 454e.
Sent from my motorola one 5G UW using Tapatalk
Last I heard is K/M was reopening their toner factory in Rochester NY
Sent from my motorola one 5G UW using Tapatalk
Well you have the pandemic in China slowing production, chip shortage, and two fires at the KM toner plants.
All those, plus the delays in shipping due to lack of containers are bringing...
It tells me download failed. But I googled the info, its going to be a hell with clients.
Sent from my motorola one 5G UW using Tapatalk
I thought it was going to be on Kyocera....Minolta too, shoot....
I dont get to see the pdf. Maybe Im new in the site
Sent from my motorola one 5G UW using Tapatalk
I unplugged the board and removed it. Left it single scan. I dont know if all bizhub come with the board from the factory. Because i sometimes swap dual scan feeders into lower end 284 to "upgrade"...
Here a df 624 and a 701 both are interchangeable. One has two wires and the other just one.
I have both on 284e, 364e, and 454e just plug and play....
No, all settings I left like they were.
Sent from my motorola one 5G UW using Tapatalk