Good day.
Your chip is correct. You need to clean the ink pump. In the drum itself
Type: Posts; User: misterno
Good day.
Your chip is correct. You need to clean the ink pump. In the drum itself
Hello, I agree that this error code does not exist.
But if he doesn't pull ink and print white papers. One should look at one way gear.
Maybe the ink got into it and now it doesn't work.
I suggest...
I have a service manual. Send me your mail so I can send it to you.
I agree. try cleaning the IN sensor. What is the status of the print counter?
Hi,
How many machines did the copiers do?
Try to replace:
CORE PICK UP ROLLER
P.F.CUPLUNG
Good luck,
Greeting. I'm sending you what I have. Is this enough?
Hello,
You can use the B4 roller on the RZ 200 machine. It's OK.
Greeting,
Hi,
I have no experience with Alibaba.
but I am from Serbia, I have some GR maintenance. Which parts you need. Maybe I have.
Can nobody help?
the machine has 1,500,000 prints. Only pickup rollers and stripper pads has changed so far.
Thank you in advance
I have a problem with the HC 5500. expel the error and X02-211 and X02-210.
The jammed paper. As soon as I set to print more paper, each 4-5 Paper stuck in.
I tried to clean the registration...
Thank you.
I found the problem cuter was stuck. occasionally work, occasionally.
does not work.Now I fixed it.
Thanks again to everyone.
Hello everyone,
I have a problem with my customers,
master machine not recognize it. Applications to master roll has not been set.
I tried to put another roll of the same acts. Only when I put...
Hello,
the error is: INK RF TAG IS NOT DETECTED INK BOTTLE.
You may not be properly set ink bottle or maybe neizpraven chip on the ink bottle.
I hope this is your help
hello,
This error is INK RF TAG IS NOT DETECTED ON INK BOTTLE.
Maybe the faulty chip on the bottle or not properly set ink bottle. Try to replace the bottle.
I hope this is your help.
I tried to replace another master roll. But has no effect.
I am an engineer. It's my machine with my customers. I've delivered the original master roll. Electricity is good. But two months ago had a...
Regards,
I have a problem with Riso MZ 770
When you create a master leaves behind a mild black lines. The same is true when the master of scener27875 or PC.
Does anyone know what this could be?...