So I’m looking at all the thermistors(4)???
Type: Posts; User: tcypy1961
So I’m looking at all the thermistors(4)???
[QUOTE=luca72;2578429]iI had similar problems a couple of times on this series, it was the double thermistor that was faulty[/Would the thermistor cause insufficient heat; that is the temp not to...
I posted about a month ago about insufficient fusing. Today I replaced the fuser sleeve and press roller with copier having same issue. I have noticed(why I didn’t check this before) that the fusing...
2 questions: 1. No error code???
2. What role does the sleeve play??? Older copiers(which I prefer) had two rollers. Fusing a result of heat & pressure. I inspected the unit more closely(having...
I purchased this copier last year from leasing company to upgrade a rental customer of mine. I farm out all IT work if customer doesn’t do it themselves. This customer does their IT and is having an...
Makes since; thanks!!!!
copier was an off lease with 5,600 copies. Now under 60,000 copies. My understanding is fuser should be good for 300,000 copies. There is no physical signs of wear on fuser rollers.
Thanks!!!
Maintenance was performed. If copier was exposed to that kind of cold I’d agree. It’s not
Thanks!!!
Fuser was rebuilt due to worn heat roller. At first call that was all that was seen. Was called back with same request and could not duplicate nor was sample left to inspect. Was told to Ed could be...
Was inside my car 45 miles away from my office hoping to get response before leaving area(apologies). Is there a solution for insufficient fusing in center of fuser unit with no visible signs from...
Customer called with smearing but left no samples. Based on conversation getting prints out where toner is not fusing to paper. This unit is used mostly as a printer. Not sure if issue happens when...
61281What would cause insufficient fusing per example. Service request was for streaking. First copy made did not show this. Made three copies example shown is the first of the three copies. The last...
Looking for complete fax option and fuser unit(any workable condition) for Ricoh Aficio MP4001 copier. Thanks!!!
Making the copies look under toned??? I believe I cleaned them about the time I brought copier in due to an error code. The environment is not dusty. Curious why machine is not calling for toner....
I replace toner cartridge about a month ago (copier was requiring toner). Now copies are light(don’t have record of installation for number of copies made). Look through sp mode to force feed toner...
other than misfeeds this is the first problem I've encountered with this document feeder. My bad on motor. it says the pick up motor turns on clockwise, the original stopper HP sensor does not detect...
Copier is Ricoh Aficio MP4001. Lists 3 possible causes; 1) reverse motor which I wonder is the motor I see running. 2) the original stopper ( which if it’s the fingers on a shaft is in down position)...
Customer called saying couldn’t clear misfeed error in doc feeder. No paper could be found. I found the call to be exactly as was told. After airing all switches and sensors, cleaning and reseating...
Thank-you; always a pleasure hearing from you & your insights!!!
Thanks!!! Feeling it has to be something with copier since I could not duplicate on the other copier.
one other question is the fax option the same for the KM2530 and the KM3035. I had to swap out...
I rent the copier out to customer it would be that would have to upgrade. Not able at this time. Thanks!!!
Would love too if I had the money. These are month to month rentals. Would your response be for the existing drum unit??? I question because as I stated I have two of these copiers (the 4030 I...
The following are 3 pics(hopefully in order) of samples of my question as to what would cause this. I have two identical machines at this location and swapped the developing, drum, and transfer units...
Is there a one step(non hassle) way to copy drivers license. Leaving on normal setting blacks out photo. I can & have shown customer how to copy licenses but unless all they have to do is press print...
Thinking of replacing some of my rental machines with these. Are they reliable that is not prone to misfeeds/jamming???
Thanks!!!!