I changed the magenta toner chip a few days ago because it burned, the toner being full. After this change, the cyan toner chip also burned, so the toner was full. Then the yellow and magenta drum...
Type: Posts; User: cristachecri
I changed the magenta toner chip a few days ago because it burned, the toner being full. After this change, the cyan toner chip also burned, so the toner was full. Then the yellow and magenta drum...
the change was made with 4 units of black cylinders to which 3 cmy chips were put. After each calibration that is performed, P8 appears
I changed all the cmyk cylinder units to see if the error still persists... the P8 error is there
They are clean... I also took them down to make sure they are clean
Hello everyone . I have a very annoying problem, namely a Bizhub C454 equipment displays the P8 error after each stabilization. I mention that the transfer belt is new, used only original toners,...
Yes... really the first thing was to think about the environment... but everything is ok and the temperature is constant. There are 3 different clients but the environment seems to be ok.
56279
I'll come back with an update on the problem with these appearing stripes. First of all, I want to tell you that we have this problem with 3 equipment respectively = C280 / C454 / C264.
I...
5580955810
Thank you all for the answers and I'll come back with some clarifications:
1. the itb unit is new and original
2. and with other itb units taken from other equipment, do the same
3. these perfect...
both ... both copying and printing
558015580155801
I have a Bizhub c454 that has a problem. It removes a colored stripe that is visible on the belt and which the belt cleaning blade cannot clean. I replaced the transfer belt with a...
Hello
I have a problem with a bizhub c364 copier. It worked in optimal parameters for about 1 year and suddenly I found that a considerable amount of developer cyan is missing. The development...
Thanks, but where do I have to do this ... I can't find this open-closed function anywhere
Hello everyone . Please tell me if anyone has ever encountered this problem on Bizhub 364, namely: the copier copies and prints on one side only and I can't change the paper settings ... it's stuck...
Hello everyone
I am interested if there is anyone who can help me with a problem that appeared on a Bizhub C360. I replaced all the color cylinders (cmy) with the black cylinders original because...
Good morning everyone
I am interested if there is anyone who can help me with a problem that appeared on a Bizhub C360. I replaced all the color cylinders (cmy) with the black cylinders original...
thanks for the answer but I have studied all the technical documentation of the xx4 series and have not found dipsw 1. If you have information on how to proceed this toner reset indicator please tell...
I want to reset the toner indicator because I supply new toner bottles with the equipment and when not completely emptied. In this case the toner indicator remains at a low level although the toner...
thanks for the answer ... I looked very carefully at all the mirrors and they are all perfect and in their place ... yes ... it was moved recently but I repeat that nothing suspicious is seen
I made this deduction ... I pulled up and made a copy ... I left on the right corner and made a copy. The result is the same and changes randomly if I push or pull the corner.
Hello all . I have a Bizhub 363 copier that has the following problem ... when making copies of the adf everything is ok. But when I put the original on the window I get a big black stain, more...
Thank you very much for the prompt response and that is of real benefit to us. Is there anything similar to the copies of the bizhub 364 / c364 series ??? I look forward to your response.
Hello, everyone. I have many copiers in Bizhub service 280 / 227 / c227 and I have the same problems with the toner feed before displaying the toner refilling on the display. The graphic symbol...
Hi all .
I have a question about the question: the DR311K black drum unit (for Konica Minolta Bizhub c280) is much lower than the DR311YMC color image units.
What differences exist between these...
Toner level (ratio) in the developer unit is controlled by an ATDC sensor. Toner level in the sub-hopper is controlled by a magnetic switch.[/QUOTE]
Thank you once again for your answers and I...