Search:

Type: Posts; User: spw

Page 1 of 3 1 2 3

Search: Search took 0.03 seconds.

  1. Replies
    4
    Views
    1,366

    Re: Taskalpha 6003i Error C-9000

    Did the customer tell you it was only happening on print jobs or did you test several large print jobs yourself?
  2. Replies
    4
    Views
    776

    Re: P3155dn blank prints.

    I would start with the simplest solution. If you have a spare charger housing that the roller sits in id swap out. 5100 is charge code from the manual.

    If you pop the charger out does it make a...
  3. Replies
    5
    Views
    1,838

    Re: KM Net Viewer not discovering devices

    Also just a heads up, some of the newer machines wont show up/be discovered unless netviewer is at the latest version. Got bit by this in the field and didnt even know there was an updated version...
  4. Replies
    19,853
    Views
    2,830,656

    Re: Let the truth be known

    You guys are ridiculous. Its no wonder you guys are cranky. Slimslob and Phil B literally spend all day 'liking" and "Thanking" each others posts. Its a bit pathetic, genuinely funny..but pretty...
  5. Replies
    12
    Views
    1,628

    Re: 6002i poor image on status page

    looks like a toner spill inside the machine thats getting picked up and smeared. Id check the charge roller for any residue in the same pattern as whats on the page
  6. Replies
    11
    Views
    1,627

    Re: Ecosys P3045dn, fuser hardened toner

    I hear ya. Unfortunately this has been a problem on these line of machines since they came out. Especially if they are running multiple stocks like checks or a thicker paper through the bypass/mp...
  7. Replies
    11
    Views
    1,627

    Re: Ecosys P3045dn, fuser hardened toner

    Heres the link to the original fix

    ecosys p3150 pressure roller build up
  8. Replies
    3
    Views
    791

    Re: Kyocera M3145idn Jam code

    check the left hinge where it attaches to the DP base if the screws are even a little loose then the DP base is cracked. If it is,then the white plate cant sit flush on the slit glass and trigger the...
  9. Replies
    6
    Views
    1,373

    Re: TAskafa 5501 , paper jam at ADF

    The simplest ones for hesi pulls are like what was mentioned dirty/slipping pickup rollers ( the turtle shell looking ones) on the upper or the belt. If not those 2 then the 3rd option for hesitation...
  10. Replies
    9
    Views
    1,112

    Re: 4002i ETC.. Not reading proper paper size

    He said he checked the arm and was pretty familiar with them.
    I second Darrys tech bulletin.

    Although the op said it does it on different trays?
    I would think the problem would follow the tray...
  11. Replies
    9
    Views
    1,112

    Re: 4002i ETC.. Not reading proper paper size

    Is it not reading from the tray the way the paper is oriented on the display?
    or if you put some thing in the feeder and it reads that is doesn't have the correct size?

    The ones on the 02 series...
  12. Replies
    12
    Views
    2,316

    Re: Kyocera M3540idn Jam 501

    That 2nd bulletin you posted shows its just for the higher speed machines .The assembly is the same for both ,the spring with a hook attached to the underside is the upgraded mod for the 3550/3560...
  13. Replies
    12
    Views
    2,316

    Re: Kyocera M3540idn Jam 501

    ssounds like the clutch pack on the right side of the machine that drives feed. they usually go out around the count that you gave
    They arent too bad to put in

    its called "Parts drive feed...
  14. Replies
    12
    Views
    2,316

    Re: Kyocera M3540idn Jam 501

    i believe the 3540 and the printer version(2100) are fixed without the spring.

    did the 501 jams happen before the kit or only after?
  15. Thread: 4002i

    by spw
    Replies
    28
    Views
    3,359

    Re: 4002i

    Just a thought on the HV unit. Did you depress each spring physically to check for internal damage to the springs? some have a catch in them and make intermittent contact. Their springiness (...
  16. Thread: 4002i

    by spw
    Replies
    28
    Views
    3,359

    Re: 4002i

    The units that were put in, are they new units? Or t/o for testing purposes?
  17. Re: P3155 jams at fuser exit at exactly same position

    You 2 are ridiculous and toxic.. The guy asked a simple question, and black cat asked him for some jam codes. Its that simple

    Instead you insult the person....

    You 2 should not be in the field...
  18. Re: P3155 jams at fuser exit at exactly same position

    Unnecessary....
    especially for a relatively newer user.
  19. Re: kyocera 3150 Is there a way to fix this permanently ?

    The only thing left it seems it could be is power related. If you have another 3150 id swap it out for a period of time
  20. Replies
    13
    Views
    2,048

    Re: M3655idn not genuine toner out of the box

    We have also had this problem. We got 6 in and 4 of them had the same message. We also had a total of 10-15 toners come in from new 3655s with broken gear locks on the sides of the toners.
    ...
  21. Thread: M3645idn

    by spw
    Replies
    26
    Views
    5,320

    Re: M3645idn

    I would try to flash with the latest firmware.

    Had 1 do this, with different message. Firmware fixed it for me
    also had 2 task alfa 4002 also do this and firmware fixed on those as well.
  22. Replies
    5
    Views
    847

    Re: taskalfa 5501i cassete

    Unless it was a user induced cassette error it will come back after the 906 after a while. Its best to test the lift motor while there after the reset to make sure it has the the strength to lift...
  23. Replies
    40
    Views
    4,854

    Re: Kyocera 3645 not grabbing an IP address.

    Maybe check the snmp setting if its private or public
  24. Re: FS4200 Eject/Feed Shaft section will not feed paper

    drichard's idea is my best guess as well. The cams sound like they are in the up position and not fully seated. I would also cheat the door switch and eliminate the door possibility. But yes Jam code...
  25. Re: New M3645idn and toner coating on lower fuser roller

    fuser unit is the same. 3302 part number. We have to do a custom setting with some customers because of the way they run it. Some also run envelopes through the bypass on the plain setting so the...
Results 1 to 25 of 61
Page 1 of 3 1 2 3