Did the customer tell you it was only happening on print jobs or did you test several large print jobs yourself?
Type: Posts; User: spw
Did the customer tell you it was only happening on print jobs or did you test several large print jobs yourself?
I would start with the simplest solution. If you have a spare charger housing that the roller sits in id swap out. 5100 is charge code from the manual.
If you pop the charger out does it make a...
Also just a heads up, some of the newer machines wont show up/be discovered unless netviewer is at the latest version. Got bit by this in the field and didnt even know there was an updated version...
You guys are ridiculous. Its no wonder you guys are cranky. Slimslob and Phil B literally spend all day 'liking" and "Thanking" each others posts. Its a bit pathetic, genuinely funny..but pretty...
looks like a toner spill inside the machine thats getting picked up and smeared. Id check the charge roller for any residue in the same pattern as whats on the page
I hear ya. Unfortunately this has been a problem on these line of machines since they came out. Especially if they are running multiple stocks like checks or a thicker paper through the bypass/mp...
Heres the link to the original fix
ecosys p3150 pressure roller build up
check the left hinge where it attaches to the DP base if the screws are even a little loose then the DP base is cracked. If it is,then the white plate cant sit flush on the slit glass and trigger the...
The simplest ones for hesi pulls are like what was mentioned dirty/slipping pickup rollers ( the turtle shell looking ones) on the upper or the belt. If not those 2 then the 3rd option for hesitation...
He said he checked the arm and was pretty familiar with them.
I second Darrys tech bulletin.
Although the op said it does it on different trays?
I would think the problem would follow the tray...
Is it not reading from the tray the way the paper is oriented on the display?
or if you put some thing in the feeder and it reads that is doesn't have the correct size?
The ones on the 02 series...
That 2nd bulletin you posted shows its just for the higher speed machines .The assembly is the same for both ,the spring with a hook attached to the underside is the upgraded mod for the 3550/3560...
ssounds like the clutch pack on the right side of the machine that drives feed. they usually go out around the count that you gave
They arent too bad to put in
its called "Parts drive feed...
i believe the 3540 and the printer version(2100) are fixed without the spring.
did the 501 jams happen before the kit or only after?
Just a thought on the HV unit. Did you depress each spring physically to check for internal damage to the springs? some have a catch in them and make intermittent contact. Their springiness (...
The units that were put in, are they new units? Or t/o for testing purposes?
You 2 are ridiculous and toxic.. The guy asked a simple question, and black cat asked him for some jam codes. Its that simple
Instead you insult the person....
You 2 should not be in the field...
Unnecessary....
especially for a relatively newer user.
The only thing left it seems it could be is power related. If you have another 3150 id swap it out for a period of time
We have also had this problem. We got 6 in and 4 of them had the same message. We also had a total of 10-15 toners come in from new 3655s with broken gear locks on the sides of the toners.
...
I would try to flash with the latest firmware.
Had 1 do this, with different message. Firmware fixed it for me
also had 2 task alfa 4002 also do this and firmware fixed on those as well.
Unless it was a user induced cassette error it will come back after the 906 after a while. Its best to test the lift motor while there after the reset to make sure it has the the strength to lift...
Maybe check the snmp setting if its private or public
drichard's idea is my best guess as well. The cams sound like they are in the up position and not fully seated. I would also cheat the door switch and eliminate the door possibility. But yes Jam code...
fuser unit is the same. 3302 part number. We have to do a custom setting with some customers because of the way they run it. Some also run envelopes through the bypass on the plain setting so the...