Search:

Type: Posts; User: 1stcavvet

Page 1 of 10 1 2 3 4

Search: Search took 0.01 seconds; generated 3 minute(s) ago.

  1. Replies
    6
    Views
    1,119

    [Misc] Re: kyocera FSC 8525

    thanx alot, that doesn't look so very hard. I think I'll take a look and see what's making the black to not turn thanx again
  2. Replies
    6
    Views
    1,119

    [Misc] Re: kyocera FSC 8525

    Do you know what actually drives the black developer? When look at the motor section in the parts manual it shows one motor called CYM drive and the other is called K drive. but in the...
  3. Replies
    6
    Views
    1,119

    [Misc] kyocera FSC 8525

    I have a problem with the black developer unit not turning. I see in the manual there is a seprate motor for black. I can't find any info on the disassembly and removal. is it part of the main...
  4. Replies
    6
    Views
    624

    Re: Ricoh mp c3001

    Clean the little skinny glass along the left side of the big glass. alcohol on a rag would do GOOD LUCK
  5. Replies
    2
    Views
    481

    Re: HP M601 won't come to ready

    I would start with unplugging all the connections. Starting from the connector for the formatter and including all the smaller connectors on the main PCB. ( small board same side). Something is...
  6. Re: HP M604 jam as paper fed to reg roller 13.20 paper jam check tray 2

    There are a couple metal flaps, you can see them when you take out the toner, they are right above where you were pushing that cardstock thru. smart move by the way. any way lift the flat closest...
  7. Replies
    2
    Views
    708

    [CQ] Re: Canon IR c5540i drum reset

    THANX
  8. Replies
    2
    Views
    708

    [CQ] Canon IR c5540i drum reset

    I'm replacing 2 color drums in this machine Do they automatically reset or do I need to run a procedure after installed? thanks
  9. [Wanted] looking for a Canon IC D1550 b/w printer for sale

    looking for a D1550 or even a D1350 customer wants on like the one they have already THANX Courtney
  10. Replies
    0
    Views
    366

    [Wanted] Looking for a working ADF model # SRDF2

    I have a customer in need of a ADF for their kyocera 3035 copier SRDF2 --- it doesn't have to be pretty-- but it has to be in good shape if it need the feed roller kit replaced that's ok PLEASE...
  11. Replies
    2
    Views
    4,179

    maintenance kit reset Kyocera P2135

    What am I missing here I even looked in the manual---what resets the --Replace the mk message----- is the drum or the dv unit reset itself. Can't find any procedure in the manual. maybe it's...
  12. Replies
    11
    Views
    1,405

    [Misc] Re: Canon ir5050 vertical black stripe on edge

    If you did't find it yet look for something hanging down just under the slit between the slit glass and main glass
  13. Re: HP M602 feeds from both trays simultaneously

    I'd say right off the bat you have solenoids , that are firing at the same time, I say they are probably stuck closed it's worth taking the right side off and see if the solenoids are stuck closed or...
  14. Replies
    3
    Views
    1,791

    Re: rejecting new printhead

    So sorry it's a hp designjet T920 just has 1 printhead probably about a 2 1/2" X 3" block. when I got there it said reseat printhead like someone had removed it and put it back. I...
  15. Replies
    3
    Views
    1,791

    rejecting new printhead

    customer called and said they needed new printhead, went out and installed new printhead. said to reseat printhead installed old printhead said reseat printhead Is this a carrier failure...
  16. Thread: T920 plotter

    by 1stcavvet
    Replies
    2
    Views
    783

    [Error Code] Re: T920 plotter sorry it's a t1300

    Sorry this is actually a t1300 not a t920 I'm figuring is the same sort of issue their IT guy said he updated the firmware ---so he probably never got it pulled down he thinks he downloaded...
  17. Thread: T920 plotter

    by 1stcavvet
    Replies
    2
    Views
    783

    [Error Code] T920 plotter

    Customer called said they are getting a message on their printer "faulty communication with firmware server" they said they tried to install new firmware---not sure if it was the reason they tried...
  18. [Error Code] Re: HP 601 41.03.02 Unexpected Paper Size Message

    Are you pulling a blank page out of the machine, when this happens??? Right off the bat I'd say the paper feed solenoid is sticking That would be my guess.
  19. Replies
    5
    Views
    1,008

    Re: hp laserjet 2015

    do all the lights go on when it stops printing??? this machine is known for having formatter problems---unplug from computer and print somethings from the menus, reports, configuration page, menu...
  20. Thread: E7-11 error

    by 1stcavvet
    Replies
    7
    Views
    4,363

    Re: E7-11 error

    flip the glass over and clean the white mylar on the end there are some small white tapes on the ends of the adf glass--- that might just be on the older sharps
    probably would't hurt to clean the...
  21. Re: Hp 700 color streaks when making black and white copies

    what ever color comes out on the paper that does not belong there, that toner cartridge is failing change that toner
  22. Replies
    4
    Views
    1,426

    Re: HP LASERJET PRO M402n

    is the laser shutter opening when you insert toner??? just asking
  23. Replies
    1
    Views
    2,812

    [Misc] Copystar 1815/1820 MFP

    Any one remember how to get into service mode on this machine? I remember something weird like they did with the 1810 copier. hold down start and some other keys--- I have one of these with a...
  24. Thread: HP 602 laser

    by 1stcavvet
    Replies
    11
    Views
    3,846

    Re: HP 602 laser

    that's if it's on the prints if they mean on the display ----then they're stuck in the start-up. usually they turned it off and back on again(could have had a power outage) either way you have to...
  25. Thread: HP 602 laser

    by 1stcavvet
    Replies
    11
    Views
    3,846

    Re: HP 602 laser

    tear in the fuser film GOOD LUCK
Results 1 to 25 of 231
Page 1 of 10 1 2 3 4