See attachedhttps://uploads.tapatalk-cdn.com/20221207/da5d4dac21028a4f9e1223126b5d9eb2.jpg
Sent from my LYA-L09 using Tapatalk
Type: Posts; User: jhalfhide
See attachedhttps://uploads.tapatalk-cdn.com/20221207/da5d4dac21028a4f9e1223126b5d9eb2.jpg
Sent from my LYA-L09 using Tapatalk
Sounds like the machine is set to default black and white (which means internal pages are BW). When printing, your print driver is overriding this and printing colour.
You need to go into the...
Why not set the machine to hold all jobs. The user can then release securely and if they walk off rather than resolve the issue, then that's on them. This situation is sounding like anyone can just...
You've already said in your post that you have reset the nvm, so this is a physical problem.
Sent from my LYA-L09 using Tapatalk
Pull back the springy cover that covers the Dev housing opening. If it's full, the dispenser is working but the developer isn't turning to take it in. Usually it's a replacement Dev housing and...
If they are on a reasonably up to date firmware level, there will be an option in the menu to 'erase customer data'. Either that or a forced ALTBOOT
Sent from my LYA-L09 using Tapatalk
Have you checked out tip number 1401352?
Same sort of image problem as you seem to have. Caused by 2nd btr retract sensor flag being damaged so 2nd btr retracts just fine but because of sensor...
Cracked hinges. Known issue on this model. The hinge mounts crack and mean the black plunger isn't pushed down quite far enough. You can sometimes buy yourself a bit longer by gluing a small coin to...
I find these machines very good with registration. With wandering registration from OHCF I usually find to be caused by the MSI pre reg transport (disconnect the OHCF, remove left panel, it's the...
This isn't normal. Once fully booted, they're fine. Having had this before, a forced ALTBOOT has always cured it
Sent from my LYA-L09 using Tapatalk
Sometimes a feeder or finisher option will fit, but isn't actually the right one for the machine. The fiery usually picks this up and won't show it.
Also, when fitting any second hand accessory,...
Annoys me no end that these models have no cleaning wand.
Sent from my LYA-L09 using Tapatalk
Tried it myself too. No joy either.
Sent from my LYA-L09 using Tapatalk
Right,
I tried Xerox's solution again. Still no joy. Video below showing my Edge settings and my SSL error. Heaven forbid they update their SSL certificates instead.
...
I've got it bookmarked. Maybe that's why it's still not working for me. I'll try accessing it from a Google search and see if that works, once I get back from walking the hound.
Sent from my...
Same issue. Here's the file Xerox gave me. Let me know if it works for you. If not, let me know and I will give you the address to email (or maybe I can cc you into my email and they can't tell us...
I still can't access gsn at all. I emailed Xerox about it again and they assured me I'm the only one. The instructions they gave me for accessing it, simply do not work.
That aside, I am finding...
You can't, just do the fiery software reload and be done with it
Sent from my LYA-L09 using Tapatalk
Sounds more like a possible POE problem to me. Is the switch providing POE to the printer and causing an issue? What if you plug your laptop into the printer directly using ethernet. Configure IP...
127K70180
Sent from my LYA-L09 using Tapatalk
That's true, you go through the Xerox channels to get the codes to convert them to 'Sold' when you take them off pagepack contract. Xerox will provide the codes, or your authorised dealer will.
...
Exit cooling fan 2 failure.
PL4.4 item 3
Sent from my LYA-L09 using Tapatalk
All you can do is a software reload to get it back to Fiery.1
Sent from my LYA-L09 using Tapatalk
Original toner? I've seen a few of these do this on compatible toner. The machine doesn't know the toner has emptied and it causes this. Throw a fresh toner in, reboot and you are in business again....
Are onboard test pages coming out the same? Fiery startup page?
Sent from my LYA-L09 using Tapatalk