Hi, just a quick one when customers add a printer via doing it themselves usually windows will use wsd and do everything. I've seen literally hundreds of instances now and I usually just disable wsd...
Type: Posts; User: fishleg
Hi, just a quick one when customers add a printer via doing it themselves usually windows will use wsd and do everything. I've seen literally hundreds of instances now and I usually just disable wsd...
0511 is usually taking two sheets at once at the tray so either you've got bad paper, bad sensor near feed unit or bad clutch after tray.
If it works A4 out the same tray then kinda only leaves...
Hate that cassette everything about it. Why wouldn't you just let it be set on the screen...
Waste toner bottle? I've done a few lid gets damaged and it moves forward when you shut the waste toner door.
Curious what mode is that? Interesting you'd think that would through all the timing out.
It's one of those problems I've seen for the last 10 years and nothing has changed... See it daily almost jam in the fuser... Needs a redesign really either they need to make it so the whole fuser...
We had a similar fault and to narrow it down we would just install say dev drums without belt then go into maintenance mode and see if the sn's of drum and dev would show up. We realised when ever...
Can't come soon enough I'd bring it in tomorrow if I could nothing more annoying then coming across techs who don't use the correct driver or wsd installed printers.
As long as it actually works...
Thanks for the warning wow would have thought they would of realised if you've blocked usb you could still force fw with a new SSD.
I need to do more tests but I usually extract the firmware on my...
Not sure if anyone else mentioned this but on the auger you have two plastic bushes either end of the waste unit make sure you take these off as usually it will crust up against the shaft making it...
Hope they watch can DM me I have a million ideas for them 😂.
Done maybe 50 in the last year... Dk-5140(A) does make a difference but I've seen those get the dreaded dash as well.
I polish them with t-cut but you've got to catch it early otherwise the dash...
I've seen this a lot what works for me is the white connector machine side bend it upwards slightly. Too much and it will snap so only bend a little upwards works every time for me.
I've also had...
The cassette on these is awful would love to know why they didn't make it spring loaded and do away with the ancient dial on the front. Just have it on the screen set paper size...
The tray with a...
Thanks could be SSD about to fail then. I went back today no idea why this worked but I did "firmware update security" and used 2020 fw without esskip file.
Probably everyone on here has replaced fusers with good old 6770 6600 errors because the foam bushes degrade and can't be replaced... had one today I just added a few shims of polyimide tape into the...
Anyone else seen this on some machines they'll refuse to update? It's usually always the last board to update which is the main board I think it's in the list as CP.
Tried to deleting esskip file...
I know there's a setting that forces the customer to replace the waste toner every time the black is changed? I've never found it, any ideas where that setting is? Maybe that would help if the waste...
I know what you mean about taking different paper unfortunately don't have that ability I work remotely. I'm just gonna have to take the approach of 3 strikes and I'll get someone else to come check...
Losing the will to live currently. I look after a lot of schools and they are all trying to cut costs which usually involves buying the cheapest paper they can find. It's usually very poorly cut on...
It's just the way the sleeve roller works on the Dev unit that's my guess it's like pulsing AC to create a cloud of toner then pulling it back so you get waves / wear on the drum is my guess. 25/30...
Welcome to the industry good start being curious keep it up. U140 machine is basically calibrating it's toner sensor so it knows what it's base level is and what it has to keep at. Genuine toner has...
From what I know 410 464 is all to do with lasers. So it's putting in more beam power or taking it away to make all colours even. The machine does compensate as the drums age by upping the charge...
Just the times we live in so many companies are going cheap to save money then blame the printer. The industry needs to catch up maybe they need to add fans that flutter the paper on pickup. The...
0511 double feed from tray and 0518 double feed in duplex?
I've seen loads and usually it's just really badly cut paper so all the sheets are stuck together in the pack. I could understand the...