Search:

Type: Posts; User: Brianneoe

Page 1 of 13 1 2 3 4

Search: Search took 0.23 seconds.

  1. Re: Strange behavior of windows 11 during install or uninstall ricoh printers

    I see this all the time lately, just go into "services" and "stop" and then "start" the "print spooler". go back to your printer window and you should see it listed.

    good luck
  2. Replies
    29
    Views
    3,847

    Re: Yellow print on RICOH MPC 6503

    It’s a known problem, the transfer roller in the belt unit is stuck.Remove the belt and clean the ends of the roller.
    good luck
  3. Replies
    24
    Views
    4,233

    Re: Savin MP C3504 and MP C3504ex print drivers

    if you have a Savin you will want to download the ppd for MAC from" support.ricoh.com/bb/html/dr_ut_e/sav/" When you the add the ppd on a MAC and you use the wrong brand the MAC won't see it...
  4. Replies
    12
    Views
    1,888

    Re: MP 7503 SC 555

    Same issue on a 7503 turned out to be low voltage below 110 coming out the outlet. Spoke with the building maintenance and they did their magic and the problem went away.
  5. Re: basic setting for extended devices is missing. Ricoh MP C307

    Update the firmware package and then the App package.
  6. Replies
    29
    Views
    6,164

    Re: SC899-00 abomination.

    Issue is with W11 and the MS driver..No problem using the correct RFG driver.
  7. Re: im c300, msg printing speed limited because internal cooling fan active

    Replace all the filters..
    This is a common alarm and it will slow down printing by half
  8. Replies
    19
    Views
    1,544

    Re: Unsure FTP protocol

    "He claimed that I should have known that and that I had put the customer's network at a very high risk...."

    The IT guy was right but he is also a Jerk. Shake it off and get on with your day. Some...
  9. Replies
    8
    Views
    588

    [Misc] Re: Ricoh Aficio MP4001

    Cannot Print PDF Files From Acrobat Reader in Windows 10 FIX - YouTube

    Good luck
  10. Re: Booklet printing from a MAC with cover sheet

    Open the ppd and select..Printer Features..Paper..Banner Page On..The setting on the machine needs to be set for the tray just like a PC driver. I.E.set in the Printer setting for the paper tray...
  11. Re: Booklet printing from a MAC with cover sheet

    are you using the ppd for that model from the Ricoh site or are you using the apple generic ppd? The apple ppd is basic with a lot of options missing.
  12. Replies
    25
    Views
    6,381

    Re: SC-672-11 mpc 2003

    Remove the Fax board if it has one
  13. Replies
    7
    Views
    994

    Re: IM2500 J001 and J012

    There is a bulletin going back to 2019 about the exit unit screws not installed correctly causing exit jams. The solution was to replace the exit unit. D0BQ4404
  14. Replies
    12
    Views
    4,638

    Re: Ricoh reset network settings

    SP 5811-011 is the NCS reset. Scan to network problems can be a scan to email or folder issue, you don't state the one that you are having problems with. If its scan to folder make sure firmware is...
  15. Replies
    2
    Views
    619

    [Misc] Re: Ricoh MP W2401 "Continually adds toner"

    If you hear a clicking noise it means that the bottles "flippers" are stuck and is not turning.Very common with this series. Make sure you can turn the left side of the bottle. You may just have a...
  16. Re: Scan to folder Ricoh C5100s to MAC (Sierra 10.12.6)

    On the MAC press Command,Shift,and the letter A at the same time. Go to the bottom and open Utility. From there you will launch Terminal.Use the telnet command just like on a PC.
    Type in "smb...
  17. Replies
    11
    Views
    7,441

    [Error Code] Re: Mpc3003 sc442-00

    Same here..Had an off lease machine missing the seals where the cyan DV unit met the toner hopper caused the sensor to get contaminated quickly.Took me a couple of trips to figure out that that was...
  18. Replies
    11
    Views
    7,441

    [Error Code] Re: Mpc3003 sc442-00

    Just for clarification, The ITB lift motor is the Cyan Toner Supply Motor. That is the ITB motor that you replaced? If not you will need to replace it.
  19. Replies
    11
    Views
    1,494

    Re: RicohC5503 taking too long process jobs

    If the machine sits there and indicates "processing"on the display you have a hard drive that's going bad.

    Good luck
  20. Replies
    6
    Views
    1,236

    Re: Ricoh mp c2003 . Error

    Go into the SP mode and check the last error code. You may have a hidden fuser code.
  21. Replies
    3
    Views
    1,714

    Re: Ricoh 2400 wide format

    SP 1960 Optional Paper Setting Enables installed options: Roll feeder (1 or 2 rolls),
    paper cassette. This setting is not necessary if no
    paper feed options are installed. (The default setting
    is...
  22. Replies
    4
    Views
    689

    Re: Ricoh pro c5110s

    From one of my older post :This is after you load the manufacture ppd. You did not state if the unit has a Fiery print controller. There is also more info on CTN on how to properly load the ppd. All...
  23. Replies
    11
    Views
    2,845

    Re: How to scan ID card on MP C3003

    You can program it in the same way as Slim stated in the scan mode.
  24. Replies
    24
    Views
    3,694

    Re: Fast Moving Parts List

    Many thanks if you can also send me a PM. It would make my parts manager day!
  25. Replies
    14
    Views
    2,212

    Re: MP 6055 Advice

    I had this problem a while back..Unplug the machine and discharge it by pressing the power switch. If the OPE is set for Quick recovery mode (default) it will bypass the Quick mode and allow you to...
Results 1 to 25 of 317
Page 1 of 13 1 2 3 4