Search:

In case someone needs this info, Ricoh said Type A and M12 have the same connector pinout. What is different in the cable that connects to the copier. Also SP 5113-5 (key card) would not enable the...

Thank you slimslob for responding.

So is the system settings parameters the same for both Type A and M12?

Thanks,

Baz

Hello, does the optional counter interface unit M12 function the same way as the Type A interface unit?

such as:

Pins 10: 24V
Pins 9: Enable
Pins 4: Color etc....


Would the system...

The brown wires are the 24V pulse and I am assuming the jumper is blue on Pins A9,B9 right?

Is this the same setup for both the type A and M12 interfaces? Do these 2 interfaces have the same...

Do the Optional interface kit Type A and Type M12 have the same pin functions?

Such as:
Enable A9,B9
24V pulse on A10,B10
Color on A4,B4 etc...


I can not get the copier to enable with...

We only use the keycounter device no Account Track.

emujo2, the 4-pin connector does separate color and B/W copies. Pulse count: 1=BW, 2=BW large, 3=color, 6=color large. But when it prints from...

Hello, we have a Bizhub C353 attached a counter device on the 4-pin connector. It enables the machine OK, copies show up accurately but prints do not. This is the utility log of what was given us to...

Thanks for the reply. I could work with that. Can use an opto isolator and just need about 100ms to trigger my circuit. Do you know which pin on which connector?

I am looking for a pulse (signal) generated when the "auto color" or "full color" button is pressed on the front panel of the kyocera 5551ci.

So far I got that it is available and on 1 or two...

Is there any where in the 5551ci copier where I can disable color by a hardware jumper? Or disable the auto color and full color button on the panel? What about the key counter port (YC25), can I...