Thanks everyone for the reply
I removed the two screws and the two pins that keep the upper counter stop
When I reassembled everything by tightening the two screws well that are fixed on the two...
Type: Posts; User: ferro10
Thanks everyone for the reply
I removed the two screws and the two pins that keep the upper counter stop
When I reassembled everything by tightening the two screws well that are fixed on the two...
Hello everyone
I have a Konica C558 that emits strong gear noises that jumps during the scan from ADF
The jumping gear is the one circled in the photo seems not correctly coupled with the other.
...
Thank you for your suggestion.
I Try With The Replacement of the Power Supply
The problem is the same for both glass and ADF
After 5/10 copies or scans the problem disappears
This test is in progress.
I wait a few days then call the customer.
Hi everyone
A customer reports me a strange problem on a Konica C364
When he arrives in the morning and performs the first copies or scans come out with this problem
6126161262
After about...
Thanks for the reply
Hi everyone
I have a customer with a Konica C754 with this warning message "Turn on controller"
Considering that the customer is no longer needed Fiery is there any particular procedure for...
haha maybe we'll meet at the customer's and have a nice beer :D
Thanks for the suggestion
As soon as I go to the customer I clean the fuser and check the cleaning roller.
I still have to go to the customer for a check and I do all the checks you suggest.
The problem occurs in both duplex and simplex mode.
Hi everyone
I would like to know if any user has experienced a noise similar to this and how did you solve it
The noise seems to come from the paper exit/fuser side.
WhatsApp Video 2023-08-28...
The Konica 283 in Olivetti versions does not exist.
I am also encountered the same problem on an HP M527
What sensor should I check?
Hello everybody
He would need the Konica 308e service manual
Would any user be so kind to send it to me?
Thank you
I send you in private what I have
If Black and White Molds What Happens? Does the Same Problem Occur?
The toner we gave to the customer was purchased before the problematic period. Fortunately, we made a big escort before that problem.
I have not detected any abnormal filling of the toner waste tray
Hi everyone
I have a C754E under management that behaves strangely with the toner level.
When I insert a new toner, the level returns to 100% but after about a week the level gradually drops but...
I don't have the front panel labels available. What can I use alternatively?
I usually when I have to regenerate these fusers I take new thermistors directly. I feel much more peaceful with a new part especially when it comes to the temperature of the fuser
For now I have been using katun toner for 224/308 / 308e monochrome printers for about 6 months and for now no problem.
thank you all for the help
the problem was the front USB cable plugged into the wrong port.
OK thank you
Today I go to the customer and check the front panel cable. If I don't solve, I proceed with the FTP update
Ok thanks it's all quite simple
Just one question the mktar_A7PU.bat file where do I find it?
Thank you for your suggestion
Can you tell me the procedure to activate the FTP update?