Search:

Type: Posts; User: Lance15

Page 1 of 20 1 2 3 4

Search: Search took 0.06 seconds; generated 59 minute(s) ago.

  1. Replies
    2
    Views
    330

    Re: Color LaserJet M477

    Luckily, HP (through my supplier) did warranty the first one. My supplier told me HP didn't want the faulty one back.

    Not sure if they will warranty another one, though.

    I can try that as that...
  2. Replies
    2
    Views
    330

    Color LaserJet M477

    Strange issue. Kinda at a loss.

    Replaced an LVPS due to no power. Worked great for a month.

    Customer placed another call for no power. Figured I got a bad power supply. Replaced the LVPS...
  3. Thread: HP4345

    by Lance15
    Replies
    2
    Views
    457

    Re: HP4345

    This should be helpful.

    61951
  4. Replies
    13
    Views
    1,562

    Re: Designjet 4500 HD Scanner

    Here's the PSU I received. Exactly what I purchased. I moved over the cable stay and used a cable tie to keep the molex contained.
  5. Replies
    13
    Views
    1,562

    Re: Designjet 4500 HD Scanner

    I opened mine too. Nothing looked wrong, but, checked for shorts using the ATX connector. The 5-volt rail on mine is shorted.

    I was thinking about stripping out the PSU, but, it is SO dense,...
  6. Replies
    13
    Views
    1,562

    Re: Designjet 4500 HD Scanner

    Should be. 180W is what I took out. I've been supporting this customers setup (T1100 plotter and T1100 MFP) since 2004. We lost this account YEARS ago, but, they still call me to repair their...
  7. Replies
    13
    Views
    1,562

    Re: Designjet 4500 HD Scanner

    What power supply did you install? I researched, took measurements of my power supply and found almost the same, but, never really found a NEW PSU that would fit. I ended up finding an "exact"...
  8. Re: HP Color Laserjet MFP M680f's with 59.00.F0 errors

    ANYTHING stuck in the paper delivery assembly?

    Check the right door. I've had a scrap of paper stuck in the right-door that I couldn't see unless I kinda removed parts attached to it.
  9. Replies
    13
    Views
    1,562

    Re: Designjet 4500 HD Scanner

    Having issues with a T1100 MFP Panel PC here. No power.

    Ordered from LPS. Got the wrong power supply TWICE. Can't recommend LPS for Panel PC issues.

    Like Kiran said, though, the Panel PC is...
  10. Replies
    2
    Views
    481

    Re: Designjet T1100 PC

    Thanks wav.

    I looked at the parts breakdown and ordered the PSU from LPS.
  11. Replies
    2
    Views
    481

    Designjet T1100 PC

    Kinda being lazy here, but, the PC attached to my customers T1100 won't turn on.

    Does anyone have the part number for the power supply?

    LPS?

    Thank you and sorry for being lazy. :(
  12. Replies
    4
    Views
    1,330

    [Misc] Re: USB scan on Lexmark X464DE

    This is ringing a bell in my head. I'm pretty sure, if I remember, I had a similar issue on an X363 connected via USB. Not sure if it would be the same for the 464, though. I downloaded the FULL...
  13. Thread: LJ M608

    by Lance15
    Replies
    1
    Views
    507

    Re: LJ M608

    Latest firmware?

    I've had similar issues with M60x models on a certain revision of firmware (can't remember which). I would go to print the Configuration Page from the Administration menu and it...
  14. Replies
    11
    Views
    1,241

    Re: P3015 tries to select tray 1

    Go into the Printing Menu and check the MANUAL FEED option. Is it turned ON or OFF (default)?

    If it's turned on, the printer will ALWAYS try feeding from the manual feed tray first.
  15. Replies
    13
    Views
    2,284

    Re: Lexmark mx611de tray1 shingle misfeeding

    The MX410de comes standard with a 250S Tray 1. Optional 250 or 550 trays can be added, but, the default Tray 1 is 250.
  16. Replies
    13
    Views
    2,284

    Re: Lexmark mx611de tray1 shingle misfeeding

    Have the pick rolls been replaced? Can't remember if these rollers need to be installed in "the correct orientation", or not. Can't remember if this model has those type of rollers.
  17. Replies
    8
    Views
    2,202

    Re: How to fix a 59.C0 error on HP CP3525

    Aligning the main drive assembly is simple. It's in the service manual how to do it.
  18. Replies
    8
    Views
    2,202

    Re: How to fix a 59.C0 error on HP CP3525

    Absolutely correct!!

    My first 59.F0 WAS on a 3525 and I took it on over two days. When I'm not familiar with a procedure, I go VERY slowly and take MANY, MANY pictures.

    The last fuser drive...
  19. Replies
    8
    Views
    2,202

    Re: How to fix a 59.C0 error on HP CP3525

    This repair isn't for the faint of heart. If you aren't VERY experienced in printer repair, I wouldn't try repairing a CP3525/CP4525 with a 59.F0 error.
  20. Re: HP laserjet M806x with grinding from pickup assembly with trays 2&3

    60 errors are lifting assembly errors.

    Is there any paper or debris blocking the lifting assemblies?

    If not, replace the lift motors.

    You can see them if you remove the trays and look at the...
  21. Replies
    3
    Views
    647

    [Misc] Re: HP LaserJet P2035n

    My guess would be toner or fuser.

    Is the toner cartridge OEM or aftermarket?

    How does the transfer roller look?

    Have you removed the transfer roller and blown out any residual toner in the...
  22. Replies
    1
    Views
    504

    Re: Xerox Phaser 6350 default tray

    Ahhhhhh.....good old 6300's / 6350's. Dell used these models for their 5100 / 5110's.

    What kind of jam are you getting from tray 2?

    Have you removed the rear panel covering tray 2 and watched...
  23. Re: hp 3600n printer prints only in Megenta and poor black quality prints

    There isn't a guide for aligning the developing drive assembly. I didn't even try that one. I ordered a new one. However, like the main drive, the gears have little holes that need to line up.
    ...
  24. Re: hp 3600n printer prints only in Megenta and poor black quality prints

    Missing the Cyan and Yellow make sense.

    Did you check the main drive alignment and right side plastics I mentioned. I know it's a lot of work and a pain, but, if the main drive isn't aligned,...
  25. Re: Hp 3600n color printer prints in Megenta and calibrates for 30 minutes on power u

    Haven't worked on one of these in a loooooong time, but, I remember they suffered from broken parts which misaligned the main drive assembly.

    Check these parts to see if they are broken:
    ...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4