Search:

Hello!


It is not new.
I think it is not that the printing is blocked, because I have been able to print pages from office without any problem.
I have already got the firmware.
I have not...

i will try to install a new driver and test it.
in other hand from my mobile iOS i havent able to print, i always get a error memory sms.

hi !
In the first instance I used the old spc232 driver already instsalled in pc, and I don't remember this problem, but I only tested a few pages.


Then I installed the universal pcl6 of the...

Hello everyone and happy holidays.
I bought a SPC252 for home.
Upon installing it I find that when I try to print I get message "memory overflow".
From the iOS mobile app (Connector) I cannot...

upp

Thanks to all


I already have the firmware and the machine updated.

Regards !

Hello team.


Due to business closure I have the following RICOH original equipment available.




B2623020
Toner Supply MP161

Yep, thanks for your reply.

Problem has been solved.

Now I am having problems with smb, doing telnet I see that it goes through port 139 so I will have to update the firmware.


I have to...

I have checked it again and it is correct



Thank you very much!
I have just solved the problem. I'm not sure if this is the solution but here are the steps.


I went to admin tools and set...

Hello forum


I have bought a second hand mpc305 and I have had the failure of not checking the network card.


When I get home and try everything I find that the network card does not respond...

It can also be done from the machine

Thanks for the link. I think I followed those steps, I would have to try WPS ... but I am not convinced works fine.

My question is, should this device be compatible with WPA2?

Thanks !

Good afternoon,


Today I have been involved with this machine model at the home of a client trying to configure the machine with WiFi network.
I have not been able to configure it either via the...

In case it helps you, from WIM there is an option in the left menu to be able to connect remotely to the machine (see the panel and manage it).
The technician should first connect to your computer...

Damn machine, I think the worst that RICOH has built in the digital age. I changed the closing of the doors, the sensors and a partner changed the transfer engine without success.


It has served...

I have never tried it. But you have the option to update firmware remotely through web image monitor. You have to download another type of file * .rfu

For now, sure not! But the machine is ready for it.

Everything points to it, shortly the technicians will be out of work.


As for the machine, in my country, the pcdu will go and change them. Although I haven't changed yet, I understand that the...

Hello ! in theory according to google your machine if it is compatible with cloud Print:

https://www.google.com/intl/es-419_ALL/cloudprint/learn/printers

I bought an mpc300 a while ago and I...

Have you tried turning on your computer without the network cable in place?
All the SC899 that I have encountered were file problems sent by the user, but this is solved by updating the firmware.
...

I bet on the wrong driver. Disable the WSD port from the web configuration of the machine and verify which driver is currently using the printer.

Did you manage to run this model in windows 10? I tried to enable SMB1 in windows features and it did not work for me. If you say it worked for you, I probably made a bad configuration on the copier

It's an option but I almost prefer to scan to email. Thanks ;)

Good morning


I am trying to configure this printer model to scan to folder, since I understand that it does not work with win10 protocols.
I have tried in windows features activate SMB 1.0 but...

The mpf have fax, I do not find information in google and ricoh official page to configure it.

In ricoh web have guides to configurations (scan to mail, folder..) but.. no mail to print