Any chance has another location for this file, this ones been removed
cheers
Type: Posts; User: matthewr88
Any chance has another location for this file, this ones been removed
cheers
Did you ever track one down for this, same machine requiring a service
cheers
try setting full colour
the machine will default B&W off the first pages colour i believe, so if page 1 has no colour the whole doc will be in b&w
believe thats your issue
cheers
WOW, did you tell them it shouldn't reqiure force
cant work out how to change, ill just yank on it really hard
my moneys on middle management upwards
Hi Guys
bit of a long shot but does anyone here deal with Uniwell ROM based touchscreens
I have a customer who wants a secondary Thermal Reciept printer, ive reverse engineered a cable to...
This software is not defunct and not able to be downloaded,
can anyone tell me whats current, im just confusing the tech support robot on the ricoh site :mad:
Anyone that confirm a free...
what was the comparitive cost?
probably wouldn't use em but some of the smaller machines they may be good for
I would say contact between either drum and belt or belt STR roller (more likely drum / Belt)
have u tested what result b&w vs colour gives you
what does a blank photocopy look like.
Pitney dont make things they just rebadge other machines
searching the equiavalent toners may help
My thoughts exactly lol
been a while since ive worked on these but as memory serves me
the fiery is your network interface, you need to connect the copier to the fiery
1394 cable i believe the fiery is accessible via...
cheers
interesting to know
ive avioded the upgrade at the moment primarily because our oki copier inhouse has no advanced driver functionality yet
but im thinking im gunna hang round win7...
ok so the screens backlight / power is gone?
you can print etc, from the machine? this proves its in a functional state and not some weird power save option
have you checked cables &...
cant remember exactly but you need to play with the tray behavoir tab
setting the tray first, paper sizes, etc there choose to not continue from other tray
is the paper sensor on the Multi feed...
Couldn't have put it more eloquently
can you resinstall old fuser to test, does look like fuser. check the image on the belt hows that look
get out of the office and see the rest of the world, couldn't stand going back to an office tech.
just remember the following:
get ur paperwork organised, its easily left to get out of control...
Mainly after the reset procedure for the Transfer Belt and the Fuser Disassembly Guide
If anyone can help
Most likely i can fudge my way through it but would much rather have the correct...
I had redone it since, not really sure what else you want
if you have specific things you'd rather know, have included that's fine let me know
has to be firmware connection issue, have you checked the board pins on either on the dimm or the chip, otherwise could be a fault on the mainboard
slimslob
Hows that slimslob, Would you like to know more?
Hi People
Just chasing a service manual to suit a Lanier MP C3002 series Printer, Pretty sure Ricoh has the same printer and manual either would do
Lanier is preferable
TIA
Matt
https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcRsTBWm4rZehVvnj9G8A2d1IMS_9JXxGqsPX8y7eudsFNbMurqlDQ
im just gonna leave this here cause story of my life
also heatshrink over bluetak u can...
Sam4s are a good swapout but not quite as functional / solid as the older sharp machines
case in point, customer had a Sharp ER-A410 swapped for siimilar in SAM4s
the customer cannot subtotal...
for you look into Idealpos there headquaters are in brissy
they are not cheap but they do cover all the needs your talking about and more
Ive sold plenty of Ipad / Samsung tablet versions of...