im thinking change u265 if possible and load some utax fw.
Type: Posts; User: Calliem
im thinking change u265 if possible and load some utax fw.
if u can get hold of floil from canon,try that
ill second that one,been using minolta rolly polys aswell for a long time,they work great,the red ones though,the green ones not so well
there are after market kits available,but oem still best option
will still require fax kit
reload about the same as konica minolta,if fiery boots to 00 its ok,check communication between machine and fiery,fw for that printing system youl have to dload from support site
!R! KSUS "AUIO", "CUSTOM:Admin Password = 'admin00'";EXIT;
check white paper detection actuator,mlk bottle plastic its made off usually deforms when opening and closing casette too eagerly by customer causing problem
[QUOTE=bergerb;1518203]Hi,
I am running a printer in a very dusty environment.
The last printer only lasted about 50k pages. Repetitive defects gauge lead me to the fuser.
The fuser (heater...
replace toner cartridge,might help have had a couple of those where it sounds like machine is stripping every gear it has but was only toner cartridge problem
if the gear didint break teeth,clean nit and glue them suckers on,or slide staple in under flat side of gear where it mounts to auger,they have a fail safe that reams the gear inside causing gear to...
replacing lift gears is a pain on those,check belt hv contacts from hvboard to contactors in front,seems like hv problem.
Hi all,experiencing crappy fuser jams try this,works like a charm.
have been struggling with same jams on old and new fuser type for same model
get old fuser,take apart upper fuser section,take...
Check dv k drive clutch at the back of machine,usually holder breaks loose causing k do dissapear