have you checked that the 2 cylinders press each other. Perhaps at the side that paper doesn;t exit 2 rollers don't press each other
Type: Posts; User: Gab
have you checked that the 2 cylinders press each other. Perhaps at the side that paper doesn;t exit 2 rollers don't press each other
Sorry for the mistake but customer did not explained well to me. He lives in other city and from phone....
Machine doesn't shows add toner message but when he makes for example 100 copies after the...
I think is high voltage . HAve you an other to swap and test?
It doesn't rotate toner bottle. I think it's TONER CONVEYING DRIVE ASSY .can i fix it or need to replace it all. Also can it be something else?
TONER CONVEYING DRIVE ASSY
TONER...
ID sensor error appeared. Also indeed copies are lighter now but it does not copy grey color. Any suggestion?
Message caSSETE 3 NOT WORKING. I saw it has something to do with cables. Customer did not move copier and suddenly this message. Any idea where to look?
Wjen sending print a PDF file , printing is late. Any idea how to speed it?
visit site manualslib.com and download it for free
I replaced drum and blade in the machine (drum compatible not Genuin) following the proper procedure. Image is ok but Customer wants to be a little lighter not so dark. What programs to execute ?
[QUOTE=KYO_OEM;2587025]drum- and dv refresh 2 times from system menu
U952 complete setup workflow, not U464/ calib only.
U139 for controlling from enviroment.
Have had several cases with outer...
paper cassete stuck about 10 inches out and it can close. Customer said it opened cassete to fill paper and then it doesn;t close. I checked rails etc and looks ok. Any idea?
You mean run drum refresh and dev refresh two times the same order from system menu?
Then Run U952 (maintenance mode workflow)/execute/setup/u464/calibr/execute /start
Then run U139(temeperture...
When sending a print pdf file about 100 to 150 pages it has a delay for about 10 minutes before starts printing is there something i can do to speed it
Printer has made about 27k prints. When print at the beginning the first 2 prints have 2 color lines at the edges about 1,5 cm width and then all prints are ok during the day. Any idea how to fix it?
MAchines are second hand and about 100k each. I have stored them in my warehause for about 3 months but when i tested them 7 of the 10 copiers had a little background on print and copy. Toner is...
When print test page from laser's menu program is ok. Any idea why test page print is ok and not other prints?
At BLACK AND WHITE PRINTS letters were grey. I tried to fix it and finally i added manually black toner and started to work fine. After 2 toner replacements suddenly started the same. Any idea?
Finally found. Have to clear memory
How to reset replacement required print cartridge on Ricoh MP 2014 - YouTube
I haven't checked it but as customer said it happened suddenly. I executed developer initiLIZATION WITH NO RESULT. anyway i will check it tommorow.
I am a tech. I used to work with Ricoh machines but now i moved to Kyocera machines. In service manual there are not such informations. In what manual can i find those informations if you can;t send...
How can i enter diagnostic mode . There aRE NO DIAGNOSTICS in service or operation manual.
I have installed several scanner setup for this machine . But in one laptop while i follow the exact same procedure i fail and i can not scan.
Is there any problem because want to scan from laptop?...
message
Replacement required
Print cartridge
Because customer scratched the surface of the opc drum i replaced opc and blade. Ever since copier made about 15k copies after opc replacement. And...
My supplier sells to me perfect machines with low counters . This machine has 50k.
For soem resons i had to store them . All i ask if i can do anything?
I bought these load of second hand mAchines . I stored them in my warehouse for some months till i sell them . LAst machines when printing and copying , appeared a dark background in the direction...