[QUOTE=KYO_OEM;2587025]drum- and dv refresh 2 times from system menu
U952 complete setup workflow, not U464/ calib only.
U139 for controlling from enviroment.
Have had several cases with outer...
Type: Posts; User: Gab
[QUOTE=KYO_OEM;2587025]drum- and dv refresh 2 times from system menu
U952 complete setup workflow, not U464/ calib only.
U139 for controlling from enviroment.
Have had several cases with outer...
paper cassete stuck about 10 inches out and it can close. Customer said it opened cassete to fill paper and then it doesn;t close. I checked rails etc and looks ok. Any idea?
You mean run drum refresh and dev refresh two times the same order from system menu?
Then Run U952 (maintenance mode workflow)/execute/setup/u464/calibr/execute /start
Then run U139(temeperture...
When sending a print pdf file about 100 to 150 pages it has a delay for about 10 minutes before starts printing is there something i can do to speed it
Printer has made about 27k prints. When print at the beginning the first 2 prints have 2 color lines at the edges about 1,5 cm width and then all prints are ok during the day. Any idea how to fix it?
MAchines are second hand and about 100k each. I have stored them in my warehause for about 3 months but when i tested them 7 of the 10 copiers had a little background on print and copy. Toner is...
When print test page from laser's menu program is ok. Any idea why test page print is ok and not other prints?
At BLACK AND WHITE PRINTS letters were grey. I tried to fix it and finally i added manually black toner and started to work fine. After 2 toner replacements suddenly started the same. Any idea?
Finally found. Have to clear memory
How to reset replacement required print cartridge on Ricoh MP 2014 - YouTube
I haven't checked it but as customer said it happened suddenly. I executed developer initiLIZATION WITH NO RESULT. anyway i will check it tommorow.
I am a tech. I used to work with Ricoh machines but now i moved to Kyocera machines. In service manual there are not such informations. In what manual can i find those informations if you can;t send...
How can i enter diagnostic mode . There aRE NO DIAGNOSTICS in service or operation manual.
I have installed several scanner setup for this machine . But in one laptop while i follow the exact same procedure i fail and i can not scan.
Is there any problem because want to scan from laptop?...
message
Replacement required
Print cartridge
Because customer scratched the surface of the opc drum i replaced opc and blade. Ever since copier made about 15k copies after opc replacement. And...
My supplier sells to me perfect machines with low counters . This machine has 50k.
For soem resons i had to store them . All i ask if i can do anything?
I bought these load of second hand mAchines . I stored them in my warehouse for some months till i sell them . LAst machines when printing and copying , appeared a dark background in the direction...
Check waste toner message. I replaced waste toner bottle with no resulr . Replaced sensor with no result. Any idea?
How can i see paper jamcode? Το what menu have i to enter
I heve this problem in one 4500i and one 5501 machines. Machine looks like is turned on but screen looks like dead. I know it is a PWB problem (if there is any other idea please tell me|) . Can i...
I cleaned IDC sensor transfer belt with no result.
When i removed transfer belt i noticed that the mark ( i mean that at the side of transfer belt at the right side there is a mark that i think...
i executed the following programs
SP 803-003 result 0x1
803-1 (tray paper sensor| result 0x0
registration sensor result 0x1
paper exit sensor result 0x1
P sensor (PWM)) -> executing
paper...
This problem usualy occurs when there is no enough developer. Replace the developer with new one.
How can see the jam, code. I am not familiar with this machine.
for sensor and clutch tests from, what results i concsludce they are defective?
error code C and sometimes B but mostly C. I replaced Reg sensor and exit sensor with no result. I noticed that when i copy from by pass no paper jam . Also i noticed when i turn paper to A4 vertical...
Black prints ara light. Color prints are ok. Toners are compatible but it workes perfect till now. Machine made about 15k copies. Any idea?
Also customer told me that sometimes 2 multicolor lines...