It takes many nails to build a baby crib but only one screw to fill it.
If you walk through airport turnstile sideways you are going to Bangkok!
Type: Posts; User: 11x17
It takes many nails to build a baby crib but only one screw to fill it.
If you walk through airport turnstile sideways you are going to Bangkok!
The early bird may get the worm but the second mouse gets the cheese!
Hey KMcopierman, it is a common courtesy that if you're gonna post a question that you reply back and let us know what fixed the prob.....Im guessin you took my UNPLEASANT advice and upgraded the...
Avalon might have given you PLEASANT help but it isn't worth a shit. Go ahead and upgrade the DCON to 49.01 like he says and maybe replace another drum and screw around and replace the itb and then...
Upgrade the firmware to the latest and greatest Main 91.02 Dcon needs to be 61.01 Please do a search for problem before you post ? I answered this already!
Is the arcade up and running? I can't seem to find it.
Thanks
Fuser costs upwards of 1200 bucks and probably is due to be replaced.
91.02 is the latest and it fixes the prob 100% of the time.
END OF THREAD!!!!!!!!
The newest sst is 4.2
There is a tech pub concerning this and if my mention of spacing out the conn had no effect than I would recommend getting the updated conn and springs for the machine side connn. This can be a...
Canon came out with new software to fix this prob. I did 2 today!
It needs to be version 91.xx
Try spacing out the connector on the fuser unit. It is the one with ac and dc lines and connects with a floating plug in the machine frame.
I usually have to replace the drum/itb drive assy to correct this problem.
Not quite sure but I thought you could turn the double feed detection off in service mode? Maybe someone else can chime in with exact details
Your xparency/registration sensor LED's are probably dirty. They are located on the xfer bed underneath the narrow black cover held on by 3-4 screws. Remove cover and clean receiver and emitter...
Do a search for BEI Bonus.
7:45-4:30. We get 45 minutes for lunch and can knock off pretty much any time after 4. No weekends or Holidays.
Your scan lamp is bad. Replace it.
Make sure you have your remote signal cable plugged in. If I remember correctly it comes out the bottom of the mc cage and can easily be missed and would give you the symptoms you described
Additional functions
communication settings
TX settings
Unit name
Call the freakin user and tell them to reposition the handle!!!!!
Double check the bias contacts as Screw Tape suggested. I believe there is a couple on that itb assy. Also make sure tension arms on itb are extended and you have tenion on belt.
Go into...
20 minutes from start to finish! Not bad. What did we ever do before the internet?
After getting to level one hit Add Func and then 2
Level 2 copier option body
I believe it is UI Scan