Good day
I want to confirm if anyone can concur if replacing the PWB LV fixed the problem? Having the same issue on a machine that gave the error after client used machine on a generator.
Type: Posts; User: Step
Good day
I want to confirm if anyone can concur if replacing the PWB LV fixed the problem? Having the same issue on a machine that gave the error after client used machine on a generator.
Apologies for only updating the post now. Rather late than never hey.
The culprit was the high voltage board.
I swapped out each Dev unit but did not make any difference. Swapped the high voltage...
Hi Guys
Some assistance needed please.
Attached image of what the prints look like when I got to the machine, that image you see is Dev carrier and no toner present on print. My first thoughts...
Another thing you need to check is if the U930 counter was cleared after MK and or drum and Main charge was replaced. Some techs do not clear U930.
Many a times this was the cause on background...
I feel your pain man...... So frustrating that the client think that the machine can feed anything and is always something wrong with the machine when it starts to jam.
I don't have much...
HI
Was this problem resolved?
I have same error on M3145dn machine. ??
Would like to know if it was a board or drum unit issue?
I will suggest you then check your connections and cabling for any defect.
And Clean the engine PWB connector (YC17)
and reconnect it.
Upgrade the firmware to the latest version
Especially...
Thank you Quatro
Do you perhaps have the Maintenance Utility app to update the serial number on this Model machine after main board replaced.
Sent from my SM-A736B using Tapatalk
There is a known issue on the Home button sinking in causing similar problem. Possibility that this could be the problem. See photo what to modify....
Hi Guys
Having a machine TA 358ci with error C2700 and making loud clacking noise. Stripped the machine too fuallt find the issue but did not find any broken gears. The error description in service...
Thank you for the info, I'll check into this.
Sent from my SM-A736B using Tapatalk
Does anyone perhaps have the Maintenance Utility available that is compatible with the ES5473?
Sent from my SM-A736B using Tapatalk
Hi
Need some assistance on a OKI ES5473 giving error 142 when starting to print.
The service manual refer to ID unit (Drum unit) but not a specific one.
As per our tech support it was recommended...
I do not think you can change the maintenance entry code.
You can change the system user and password yes.
Make sure you do not have any sticky buttons that interfere when trying to access...
Hi
I had similar issue and it turned out to be the fuser unit temperature was too high. Check your paper settings and make sure it is set to the correct paper thickness and gsm range. Check your...
Visit the client today and this was my findings.
The cavity that the sensor align with indeed had paper fluff in it. See photo.
Without cleaning anything I tested the machine and had 1x Jam...
Thank you so much for all the replies, ill do a proper check on these scenarios suggested and give feedback on my findings.
I would like to double check all the options before ordering and...
Good day All
Any help on this issue will be highly appreciated.
Experiencing constant Jam 0511 on this M3860idn
When it starts jamming 0511 it will do this for a lot of times after each other...
Looking in maybe relocating to New Zealand.
I am a Senior field tech but Job title Key Account Manager.
Background in Field service Senior position and looking after Key clients contracts rentals...
Update - Yes the Kyocera Firmware do work on the re branded Olivetti machines.
And also for those using KFS you can also update firmware to the Olivetti on KFS.
Tried and tested 100% working
Hi Guys
Does anyone know if the rebranded Kyocera machines as Olivetti can take the normal Kyocera Firmware?
Good day all
Hope anybody have some experience on this jam problem.
We have two TA 4012i machines with random 0511 Jams.
We have not yet replaced any clutches or drive assy on the feed...
Unfortunately i did not check this before hand if the web interface says something different.
Will check it next time.
Update on findings
Problem solved.
The front cover has two door sensors on the cover open/close. One micro switch and one switch with the silver plate switch
The sensor activator/ pins...
I also had similar problems like this with light prints on some colours.
It was a verry easy quick fix.
After you replace Main charge rollers or complete drum with Main charge roller yoiu have...