were using MOLYKOTE multi purpose lubricant
Type: Posts; User: jermaine
were using MOLYKOTE multi purpose lubricant
that file is firm update application. it uses .upd/.djf files. its more like drag en pull into it in maintenance mode.
for more questions mail me at jermaine@zenobianv.biz
try these steps friend hope it works
TN-450 Toner reset Instructions FAX / MFC / DCP Printer Series
1.Open the front cover to the toner/drum section of the printer
2. Press the Clear/Back...
Try this hope it works
Fuser life reset instructions
a. Press OK button, then GO button, next press UP (+) arrow button 4 timesNOTE: To enter the maintenance mode, you must press the GO button...
i checked the SM and saw that there could be a problem with the flat cable. attached the SM for you
let me know if there's any questions
did you try amazon? a customer ordered the same part once because we didn't had the part in stock. we replaced the part for the customer and the machine is still working fine now
mostly is the is a faulty laser unit (beam or senor). so replacing the laser unit will resolve the problem
mostly when this problem happens try to replace the inkt cartridge sensor. both of them. the one at the top and the back. it will surely work then
see attachment. if you can't order these parts just take the roller and clean it with warm water. clean the black bearings with a cloth and try to put some with grease on it
did you try replacing the fuser unit?? we had that kind of problem here, like blurry print, or sometimes jam rear, or then jam duplex. so we changed the fuser unit and everything is working good. the...
the heat is roller is a tricky part to order. it doesn't come separate. what i always try to do is keep the old fuser units of the MFC 9460/9560/9970 that are still in good shape and then try to fix...
Hey guys,
I have a problem with a MFC 9330CDW, I hope you’re familiar with this type of model
The display won’t turn on. It starts up you see the brother logo and that’s all. Nothing more. Try...
Hi all,
I'm new here so some help and advice please
i have a MFC 9330CDW and the prints are coming out with black streaks, sometimes you can't read it at all faded print. but not always!!...