So glad you don't have Covid. You would only have a 99% chance of survival. Way too dangerous.
Type: Posts; User: rspicer
So glad you don't have Covid. You would only have a 99% chance of survival. Way too dangerous.
To add to the tool list. I think my most used tools, other than a #2 Phillips screwdriver (magnetized), would be a small flat blade (tweaker) screwdriver and a pair of duckbill pliers.
Many moons ago, in the Analog world, I worked for a Lanier Dealership. Their monster of a production machine was made by Kodak. I didn't know Kodak was still in the copier business.
What is the error message?
Try stopping the copy during the process to see if the image on the ITB is good. Since it seems even across all colors, I doubt if it is a specific drum unit. I have seen the right side door on...
I'm assuming these are run in the portrait orientation?
It looks like the developer cylinder is arcing to the drum in certain spots. It could be something metal stuck to the cylinder, or it could...
I don't think I could limit it to just 1. I am also a big fan of Clint Eastwood Westerns. "The Outlaw Josey Wales" and "Pale Rider" Are my favorites. "High Plains Drifter" is good, but kinda...
The frames on those ITB units weaken over time and consistently cause e75 errors. The new ITB unit should have the mod kit and should take care of the problem. Make sure you perform the ITB-INIT...
According to my documentation, Sharp stopped supporting that model in 2019. that means no new parts have been made for 3 years.
Welcome!!
All I use is #2 Phillips. On most of the cover screws, you can also use a 5.5mm nut driver.
The halftone test won't tell you which drum is not registering properly, try a PG-10. The instructions you wrote out look correct, who knows why it won't print the test. Maybe you need a Canon tech.
I've had the exact problem on a C7260 which is similar print engine. Check the color drums to see if they are past their life. Replacing them will most likely solve your problem.
I watched the movie "Bullitt" the other day with Steve McQueen. Near the end, the cops use a 70's era fax machine that used a stylus to transfer the image with carbon paper. I don't know the...
I've seen something similar to that in really dry environments where the toner spreads out on the paper after transfer from the drum/ITB. The fact that it only happens on black and only when running...
The document is actually 11x17. I checked.
They were more concerned with buying the cheapest machine we had in stock rather than paying more for quality.
It's interesting what clicking 1 check box will do. I had a lot more hair before I started dealing with software issues.
So, a customer just bought an MX-3051. It's a civil engineering firm that...
The First Amendment guarantees freedom of the Press, but with freedom comes responsibility and accountability. That hasn't happened for quite a while.
Many years ago in the analog days, I had a customer with an old Lanier (Rebranded Toshiba BD series) that had the paper cassettes inserted in the right side of the machine and an exit tray sticking...
When I started in the business in 1994, I was told my job would not last long because everyone would go "paperless" in a few years. My workload has not slowed down, even during the Covid hysteria....
Worst one for me was running over a possum on a hot summer night in Michigan with the windows down. I very clearly heard its skull pop under my front tire. Not a sound I would like to hear again,...
Set SETTINGS/REGISTRATION>SET DESTINATION>INCLUDE PASSWORD WHEN EXPORTING ADDRESS BOOK to ON before exporting the DCM file from the old machine.
That color drum motor runs a lot of stuff, and it sounds like something is binding up. Have you run the motor in SIM mode? Try running the motor without the Transfer Belt, color drums, and color...
The company I have worked at for the last 3 years has a truck with a liftgate. I never had the luxury of one until now. It is so nice not to either try lifting machines by hand or push them up a...
When the turkey is thawed, dismember it into separate legs, thighs, wings and breasts. Boil the back, giblets, and extra trimmings to make stock. Brine turkey pieces overnight in 4 parts stock, and...