Search:

Looking for suggestions on this issue. Top sheet is #100 Classic Linen Cover 270 GSM and the bottom is #100 Cougar Cover 270 GSM. Both printed on Ricoh C901s with exact same custom paper settings. ...

This likely applies to other model numbers of this finisher as well. After a changed staple cartridge SC 745 showed. Found the bracket that holds the Stack Feed Out Belt HP Sensor was bent just...

Not 100% sure but I believe there was a low magenta toner or a low % indicated before it went to toner out but then again I could be wrong on that. I did check the nozzle and toner was moving...

I have an issue with a production model C901. Machine stated replace Magenta toner while running job. Operator pulled out the cartridge to replace but it was 3/4 or more full. No SC codes thrown. ...

I used SP 2109 (there is no 1103 on the c901)

I select 100% solid, then select 00000100 for the cyan image only, go to the apl window and select print but I am getting 100% black or maybe 100%...

Where are the solid color patches in service mode on the c901?

Thanks,
JM

Need help to figure out the cause of the corners of 79 gsm carbonless paper 11x17 dogearing on the corner before the image transfer to the paper. Changed to a new ream of 2 part carbonless...

I also tried a different drum with a master on the drum and get the same error. I have 3 other drums I can try and see if they do the same.

Thanks for the help. I put it in test mode and it beeps and changes interval when I put my finger in front of the sensor.

I also tested #54 disposal box master sensor and it is working as well....

I have a GR3770 that has the "Disposal Error remove cylinder and discard master" message. When the message first occurred there were multiple masters folded up in the used master disposal cassette...

does the imaging unit have chips?

I am looking for controller software CD and firmware for Konica Minolta Fiery E10/IC-412... PM me or post here below

Thanks,
Goldbuckle
DPS Tech Services

I did try that just to be sure

hey guys, I am stumped with a problem thought someone here could help me with what I am missing... customer had issue stretching the image 4-5mm in one corner of the sheet, confirmed its not a skew,...

I just rebuilt a fuser for a c652, took about 2 hours first time but the next one I can probably do in about an hour. Copylite sells both fuser rollers.

I have a c3220 with Fiery on a TCP/IP connection and I can print directly to it from a Windows XP computer but I can't from 2 Windows 7 computers. When I sent the file from the Win 7 computers the...

I got a C3220 with a N1 finisher throwing error code E-000584-0003, service manual page 989 refers to switch MS3 & MS4 on the finisher (N1) can someone tell me where those are or post a parts diagram...

I don't think you understood my original post, the ITB is nearly brand new, it is not slipping & there is no toner on the roller underneath the belt, I already checked that. Also checked the gears...

Anyone? I could use some help on this one I am completely dumbfounded....

got a c3220 problem, a DCON CLR was done on this machine and there is no P-Print inside the machine, the transfer belt was removed & checked for deformity of the belt due to a wavy pattern in the...

In need of a service manual (pdf would be fine) of a Canon C3220. You can email me at johnamartin@bellsouth.net...
Thanks
John

The Xante Illumina handles up to 502 gsm. It is an Okidata manufactured machine modified by Xante to handle heavier stocks than Oki's version. The Okidata C9650hn Color Signage Printer model will...

The best price I have got so far on the GPR-11 is $325 for a set of CMYK through a local tech company...

I did find someone locally who was selling 2 full unopened sets 8 cartridges 2 of each...

How much are you paying for Canon GPR-11 toner for the C3200/3220 machines? Is your price wholesale or retail? OEM or aftermarket?

I have a Canon IR C3220 with a C1. The machine was not recognizing the C1 unit so I went into service mode to reset MMI, DCON, etc. I need help on configuring the machine to recognize the C1.

To...