Search:

Hi!
Thanks for your help...!
Yes, this was the problem!
I've worked with large format printers for almost 20 years and have never had a problem that I couldn't solve - until now... :)
A bit...

Hi!
Have you had time to check what was possibly wrong with your printer?
Regards
Lars

Thanks for the reply!
This problem occurred after I used loose sheets for a job and after that the problem occurred!
Tried changing a head (C) and it's still the same problem!
Must be an internal...

What is the problem...!
We have av "old" 1050c that have working perfect for the last 10 years (!) and now,
on testprint, it's only b/w on the head test but color on next part of the test page...

Wondering if anyone can help or understand this..?!
(not even Canon technicians can help or explain this to us...?)
We have a Canon ImagePress 8000 and use PRISMA RIP
If we run a job that is to be...

Hello!
Thanks for the information!
The machine is on "hold" for the moment ..., but a will try this asap!
Regards
Lars

Hi!
What is wrong if registartion is good on one side, and not on the other ( left-right) ..!?
Pls se picture!
Regards
Lars
45765

Hi!
Thanks for the information!
We will test this asap!
Regards
LAKA

Hey ! well, it may well happen that someone does wrong ... sometime.
I'll double check on this after the weekend again ... :)
Regards
LAKA

Hi!
Now I have tried an old ITB that we changed a year ago (it worked then, but has small white dots).
Exactly the same problem with registration with this ITB! ( see attached picture)
Must be...

HI
It seems that the registration is skewed on paper (see picture)
It is ok on one side.
How to adjust it?

Regards
LAKA
45600

Hello!
We have tried this and the result is a "NG" message.
This could indicate that ITB is bad, but we are pretty sure that is not the case!

Hello!
We have a Canon ImagePress C6000 VP that has registration problems after we changed an M image drum.
ITB looks good and we haven't had any problems before with the registration.
Anyone...

Hello!
We have a errorcode E000001-0250-05 on our C6000VP
Presume it is the second fixing unit - but where to check ?
Regards
Lars

Thanks for the reply!
Probably seems to be the problem. (has looked inside)
How do you solve this? (we do not have a service panel / card)
Can you change position manually?
Regards
Laka

Hi!

I've got a Perfect Binder-B1 connected to my Canon ImagePress C6000VP and now I get the error code E0005bb-0005-61. Does anyone know what this means?

Regards
Lars

Hello!
I have checked the connections around the terminsor and then made a err. reset so
now it seems to work! (?)
Regards
Lars

Hello!
A have a error code E000003-201-05, and as far as a understand it is the main termistor on the fixing roller (secondary fixing).
( a believe reding the manual :)
Have any one any other...

Have now ad the perfect binder to the C6000 and
asign the unit in the setup menu and all is working !!
Thanks for all support :o
Regards

Hi!
Nice ..:) !
I will check/test this tomorrow !
Thanks!

Have now swop the trimmer and two-way knife to the C6000 and it works just fine !!
Have to move also the booklet trimmer. The one on the C6000 did have different firmway, so it did not work .
...

Thanks again för the reply!
We will check this asap tomorrow when back on office.
Let you know if we managed to swop over ....
Regards

To make it simple ... can we take the booklet trimmer and twoway knife from the 7000 to the 6000
or is there something (firmware)that have to be changed in the 6000 ...??

Ok - thanks, we will look at this "after work". .!
Will come back !
Thanks!

OK - thanks for the reply!
The C6000 have had a booklet trimmer so that was easy to change , but did not have the two-way trimmer/knife and this one don´t show up on the screen ?
How do a know...