Search:

Many thanks Gift, You were right to suggest the image on the drum check, image was strong on the drum! I replaced the ITB and problem is gone. Don't know yet what has gone wrong with the ITB unit, it...

Yes, the image on the belt is faint. If it was loss of charge I would expect the image to fade, but it stays at even density.

Hi All, got a puzzle on a MP C407 with an odd density problem, the yellow print is OK for the first 1cm (quarter inch) then there is a sharp cut off and the rest of the page is at about 20% of the...

Thanks for the reply, Telnet access reset to 0.0.0.0 for each range, but 'save' comes up with invalid command. SP5828 did not have the telnet enable option in the dropdown list. but telnet connected...

MP C407 access control, cleared SP5801 -11 it cleared the network settings but the access control is still on. I reset all the ip settings but still can't access the web page.

We have bought in a batch of Ricoh MP C407 machines for refurb and 1 has a problem. When I set the ip address and subnet mask to our normal test address, I could not access the webpage. I get 403...

Thanks, I Got it working! Now that I know there is no secret SP mode to set. Replaced the NIC board reset the SP switches back to Fiery mode and started again, This time the printer mode came back....

Yes, the Fiery controller board has been removed from the copier. Did you get your machine to work skinnyB?

Customer has a C5503 copier that used to have a fiery (E22C) fitted, but now wants it to work as a stand alone machine. I have been asked to restore the machine to normal functions. It has no printer...

Hi all, I have been handed a phaser 7800 with an odd error, the machine boots as normal and comes to ready, no errors showing but if an internal print job is selected the machine says job has been...

OK, update latest. fitted new HDD and used Altboot usb stick (needed to have a forced-upgrade 0 bit file in the Altboot folder) and the machine is now working, most of the config settings were lost...

Thanks EXOK for the quick response, the fan on the controller is working and I can hear the HDD slightly when the machine reboots. I thought the HDD's were specific and the machine boots from them, I...

I have a WC7830 xerox with a constant reboot issue, on switch on the machine shows the green energy save screen for 2 mins then goes black for 20 secs then the machine reboots and the cycle starts...