It could also be the Drum drive or Main controller
To see the service manuale chap 2 Secondary Transfer Bias Control
Type: Posts; User: giogi
It could also be the Drum drive or Main controller
To see the service manuale chap 2 Secondary Transfer Bias Control
What you say is very strange.
the instructions I gave you work and delete any psw.
can you kindly put a picture of the situation you see on the LUI?
I am not talking about Fixing.
I'm talking about the mechanical main movement unit at the rear.
FM4-8390-010 DRUM DEVELOPING DRIVE ASSEMBLY
that printer model has a problem with bushing wear in the MAIN DRIVE.
It usually occurs on devices that have a high number of black prints.
security policy
Lv2 Copier > Function > Clear > PLPW-CLR
Try launching these service modes
Lerv2 COPIER > FUNCTION > LASER > LD-ADJ-Y M C K
Lev1 COPIER > FUNCTION > MISC-P > AT-IMG-X
GREAT
OK perfect
this information was in point 10 of the procedure in the technical manual as I told you
10. Switch the size information in the following service mode.
- COPIER > OPTION >...
please check better
pag. number 34
60516
NOTE:
To change the paper size of this equipment, refer to the HCS Service Manual Chapter 5: Adjustment.
on the service manuale there is a 6 chapter "Startup System Failure Diagnosis" specific for your problem.
try
Settings/Recording : Function Settings : Common Settings > OCR (Text Searchable) Settings > >
Turn off automatic recognition
check if lev2 COPIER>OPTION>DSPLY-SW>UI-BOX is 1
this suggestion don't work
to perform the co-ordinate calibration of the operator panel,
enter service mode and press button 5 three times.
before pay attention your actions
E355-0001/0003
Serial numbers conflict among the SERIAL NUMBER PCB, Flash PCB, and Memory PCB
Triggered when serial numbers conflict among the 3 PCBs at main...
Registering Server Information
Only for copy function....
On the LUI
Function settings>copy>select color setting for copy >
on the DX models in service manual chapter 7 Troubleshooting Items
In every service manual there is this table
the service manual report
56518
who has official information on the types of formats that can be printed from the USB stick, on the ADV DX models?
thanks
this is possible only directly on panel operator
54947
Replace the Soft-ID Number PCB with a new service part only when E350 occurred.
enter service modes and press the '5' key three times.
Crosses will appear which you must press.
this is the calibration procedure.
first set in service modes to 1
COPIER>OPTION>USER>SMD-EXPT
then enter RUI
Settings/Registration : Management Settings : Data Management > Export
select all and export using level 1
The DCM...