Search:

the toner chutes leak, as mentioned above, dusting the position sensors with toner, ive had it a couple of times

i've seen problems with secondary trans belt. first sided looked fine. second side in high image areas started to break up image. looked like lots of pinholes in image. i replaced belt. fixed...

MX-3070N Password reset

i always start with loading current firmware. it solves lots of funky issues, especially printing issues

Ive seen this problem posted here before, with possible solutions. i just can't find it now.

the magenta toner is stripped from dev unit. i have tried a new developer unit,along with developer...

absolutely, fixed the exact problem today. take out the feed station and change both sensors

it sure looks like a fuser issue to me. i.m only suggesting this because you are not familiar with sharps. there are levers on the fuser that have to be in the down position for 20lb stock. if...

try simm 50-22

if it will not adj or goes out of adj i have changed the laser unit. it always seems to be yellow for some reason

i would take a close look at the cleaning unit. make sure its not seizing up, and the cleaning blade is in good shape. i can't see anything else in the machine damaging the belt

hi all. newbie checking in