I agree with the desktop models, the image units seem to fail at any moment.
The larger i series machines have toner hopper issues, if you move a machine across non stable ground, the vibrations can...
Type: Posts; User: Lync
I agree with the desktop models, the image units seem to fail at any moment.
The larger i series machines have toner hopper issues, if you move a machine across non stable ground, the vibrations can...
If it had a vendor/key counter previously installed on it, make sure software switch 35 is set to 0.
Software Switch 35 enabled has the following description:
Fax/Scan button and Box button are...
Log into Admin mode on the screen of the machine not the web browser and disable SSL/TLS in TCP Socket Setting (Admin - Network - TCP Socket Setting) - You will re activate this later
then make sure...
Thank you Jotunn,
It worked. Did you put the serial number in or leave it blank?
Lync
Hi Jotunn
MFP Serial Number (BLANK)
MAC Address: 00:50:AA:44:2B:CB
CE Password Reset Request Code: 8QFW8-QGJ5U-KBZFF-SV8TP-TP7KT-KG8YD-ENBQG-8YTJ7
Actual machine serial number:...
@jotunn
Hi Jotunn,
I have a C250i which I have just replaced the CPU card and Storage board because they had failed.
I have done a storage board controller firmware update and normal firmware...
Vacuum out some of the toner in each hopper until you can see the toner level sensing arm at the back, it comes off the hinge and doesn't detect the toner level correctly. This can be clipped back...
This is amazing. Thank you.
I am referring to Windows 11, I'm wanting to go to the Old Devices and Printer window.
Even when I am in that window and copy the location at the top "Control Panel\Hardware and Sound\Devices and...
Classic-Shell hasn't been in active development since 2017, it has been picked up by volunteers and is now called Open-Shell. Are you using Open-Shell? Or does the original Classic-Shell still work...
They make it more and more of an inconvenience every time a new version of Windows comes out.
If you left click on Devices and Printers in Control Panel it takes you to the new Bluetooth and Devices window.
If you right click on it and Open in New Window, it takes you to the Old Devices and...
This brings up "Bluetooth & Devices > Printers and Scanners"
You then have to click back on Bluetooth and Devices, then click on Devices, then click on More Devices and Printer Settings to get to...
If you left click on Devices and Printers in Control Panel it takes you to the new Bluetooth and Devices window. If you right click on it and Open in New Window, it takes you to the Old Devices and...
This one is good, It's not the old Devices and Printers window but still gives you most of the options.
This brings up the new Bluetooth and Devices window, not the old Devices and Printers window. From there you have to click on Devices, then More Devices and Printer Settings.
Why is Microsoft trying to stop you from getting to the old Devices and Printers in Windows?
Or just making it harder for you to get the the old Devices and Printers?
Or not even letting you create...
Why is Microsoft trying to stop you from getting to the old Devices and Printers in Windows?
Or just making it harder for you to get the the old Devices and Printers?
Or not even letting you create...
Most toner has developer (or carrier) in it, this can scratch and damage the parts you want to protect. You can extract the developer out of the toner using magnets but it takes a long time and you...
The auger under the toner hopper may be jammed up with toner. Shine a torch through this part circled in image at the end of the auger to see if you can see yellow in it. It may mean the fabric...
Has anyone else come across this issue with the screen display reversed on a copier?
The screen image is backwards but the touch is still in the same spot so you have to press the right of the...
Change the IP address of the printer, someone on the network has probably got an old print driver installed that is pointing to this IP address. (Hopefully it is not a public IP)
Pull the tray out and check the Holder (A0ED627500) Part 6 in image. The plastic that holds onto the shoulder screw becomes cracked and it does not move properly. Push it in and see if it springs...
Looks like the drum has been exposed to light for too long.
If you are getting a grinding noise from the fuser before the error, check the plastic that holds the gear that turns the fuser. If the gear gets under any strain is cracks the plastic and the gear...