Have removed hard drive and reseated. No E602 errors. Hard drive check on *24* is Ok. Still un resolved. Any further ideas would be appreciated.
Type: Posts; User: sly
Have removed hard drive and reseated. No E602 errors. Hard drive check on *24* is Ok. Still un resolved. Any further ideas would be appreciated.
Hi, thanks for reply.Already done as mentioned in original thread.
Updated latest firmware/software.
Hi all, any help or thoughts welcome. Ir adv 4535i will not boot up , screen stuck on checking data.
I have reloaded latest firmware. Still not booting up, checking data , *2 and 4 on start up all...
Great. Thank you for your help and reply with part numbers.👍👍
Can anybody help me out please with the part no for the DADF- BA1 maintenance kit that include all the sep/ pick up/ feed tyres . Thank you.
Thanks Canon Fixer. Replaced Registration clutch as you suggested. Sorted issue. Thank you everybody for your suggestions and help.
Hi, Solenoid part no FK4-0725-000. it probably wont need replacing. Just bend the catch part to open or close more as mentioned in previous thread.
Did mention the Jam code 0107 on the 0riginal thread.
Thanks Nick, have you ever had issues with the light type registration sensor. I have had issues with the old flag type with the damper pad getting sticky, thought the new reflector type fitted to...
Thanks for reply. The jams are occurring with a new fused unit not just a film replacement. Will take a look at your suggestions when I visit in the next few days. Thanks for your input.
Have a 4235i with jam code 0107. Paper from all draws along manual feed jam at same place in fuser ass when copying single sided. I have fitted a new fuser ass which normally resolves jams with this...
Thank you guys for your help. luis1984bol great help straightened up the solenoid arm catch and problem is resolved. Thanks for your attachment of issue. makes complete sense only thing I had not...
I have a canon 1435 intermittently the cassette pick up tyres keep rotating. the machine does not jam. it causes a issue if you remove the cassette once the existing job has completed as the next...
Hi all, have seen previous posts regarding this error code. people adding shims resolving the issue. what connector causes the error is it the smaller one at the rear of the fuser unit by the paper...
Hi folks, got visit machine with message add black toner when replaced. any major reported issues with this problem.
Can anyone tell me how you enter service mode on the Canon DX3725i. Have they changed it from *28* As there are no button keys and just a touch screen.
Torque limiter resolved the problem. Thanks you all for your thoughts.
Agree with the previous post . you have the old door and guide. almost certainly that is the issue. not getting enough pressure on the paper feed rollers.
Has the lower door been modified as previously mentioned (door shown in your picture) if so it will have a leaf spring in the middle of the black paper guide the door shuts onto. the original un...
Only jams when copying of the glass face up delivery on finisher. paper is catching on rear side of machine once just out of fixing assembly.
any thoughts would help.
Thanks for your help lads. sounds easy when you have the correct information, anything different in the mailbox set up as I will set them up when I visit later in the week, would appreciate any...
Can anyone help customer requires ID pins have set them up in department ID management. have enabled in ID Management settings. when you press ID on control panel nothing, just normal copy screen no...
Thank you folks for your replies. both with useful information. Will order the new torque limiter as it does sound like that of the hard rubber separation roller binding causing jams . Will also...
Thanks For reply. I know the pick up return spring is in place I have seen these come off before so had checked.😒 I agree with you normally these don’t have major jamming issues. I am beginning to...
Canon iR 1435if is jamming at Sep/feed rollers around every 10 copies. fitted new pick up and feed/Sep rollers. Making a loud noises before jam occurs. have had a look at drive system but not removed...