Are you by any chance updating the printer drivers as well as the firmware?:
Type: Posts; User: bauer
Are you by any chance updating the printer drivers as well as the firmware?:
If you are replacing the developer unit then you use PART # 6LE23638300 or the developer kit that includes the parts to rebuild your current dev unit use PART # 6LE39048000
6LE23638300
EPU-FC35-C...
Check the fuses on the power supply board.
Also the sensors & interlock switch.
Are you sure that is the correct model #, as BLI has no listing on that model
If the paper in the tray is feeding long ways it is LTR, if it is feeding short ways it is LT.
Check the paper orientation to coincide with what's in the drawer and what is on the display.
If they...
I'd check the silicon cleaning roller & the upper fuser roller.
if the cleaning roller is caked with toner, replace it.
He sounds like a brain dead service manager.????????:p
41 The polygon motor in the LSU failed to operate.
“DEVICE ERROR 41 or 42”
Check points
Is the cable firmly connected between the
LSU and the Mother PBA (CN12), be-
tween the Mother PBA (CN24)...
[CEA0] Revolver home position detection abnormality
Is the revolver home position sensor working properly? May need to be cleaned.
(Perform the input check: 03-[FAX]ON/[2]/[C])
NO 1. Check if the...
Have you tried a new HDD?
Check the firmware version on the MFP
Then install appropriate firmware.
I don't bother replacing them, all I do is cut the damaged tabs off top to bottom and solves my jam problems
[E3E0] Paper fed from the LCF not reaching the lower drawer feed sensor
Open the side cover. Is there paper in front of the lower drawer feed sensor?
Is the lower drawer feed sensor working?...
Are you sure that is the error code as I have no such code in the manual?
If you have access to Toshiba's FTP Site the Vista drivers are there and do work with Win 7 (down load and burn to CD )
They are available from Toshiba at $ 9.00 CDN each
What model & where is it used?
If you need a set of jigs, I have a spare set. PM me if you need them
The e/s 305 does not require a dongle, print and scan are standard in North America.
Have you setup the IP address?
The information you are looking for is in the SERVICE HAND BOOK .
The part # is 6LA43082000. also used on e/s 230,280,350,450,3511,4511.
CD10 Process related
service call
Cleaning brush drive motor abnormality: The cleaning
brush drive motor does not run normally when the power
is turned ON or the copying is started.
Error...
Toshiba e-STUDIO6530cT
Status: Current
Manufacturing Status: New
[F200] Data overwrite kit (GP-1060) is taken off
Clear the service call “F200”. (Key in “0” at 08-633.)
* When the Data overwrite kit (GP-1060) is taken off from the equipment, the service call...
I'll second that, SSGUY he really should call a qualified Tech
[C550] RADF I/F error
(1) Check if the harness connecting the RADF board and SLG board is disconnected or open cir-
cuited.
(2) Check if the conductor pattern on the RADF board is short circuited...