I would like a copy as well. Thanks.
Type: Posts; User: illude2
I would like a copy as well. Thanks.
I could not find v4.19 but using the current version of 4.28 I was able to create a lock print only driver. I did not see the 5710 in the list so I used the 3710.
46353
We have numerous machines with Papercut and card readers. On the 04' models we did have to go into Web Image Monitor - Configuration and then "Program/Change USB Device List". For our card readers...
We have a possible customer that is currently using a fleet of HP printers that are connected via USB cable. They are scanning their documents to folder as pdf documents (As far as I know the HP...
Ran into the 995 the other day on an 04' series. Ended up needing a main controller. Even tested a working main controller in the machine and it would not work. New board worked fine. Put the 995...
We just purchased a used MPC3504. We cannot get into service mode. Admin authentication is off. Service mode lock is off. We can get into 143 service mode. Is there even a way to change the key...
What issues are you guys experiencing? We just setup an IM C3500 yesterday with a fax option. We used the current package 2.23. Should we be worried?
Thanks
Java v11.** is standard and included with the machine. v11.41 is the newest available.
417493 is a type M19 For use with: Ricoh SP 8400DN, C840DN, C842DN printers
416572 is a type M2 for the MPC2003-6003
The are not the same from any documentation i can find.
Do they have the media slot disabled in Web Image Monitor?
Could they have told you the wrong area? 056 can also be an ADF registration jam.
5-113-02 Set to 0 to disable that message after the app has been uninstalled.
Did the certificate expire? I know on the older machines we always had to create a dummy certificate on the WIM under device certificate for them to work.
Do you mean auto specify sender name? I have attached some pictures of a typical setup.
I have not seen a machine yet that can use office365 without a relay server or certificate added. It's a Microsoft "issue" not a Ricoh issue.
It may just be the format of their media devices. I have 2 16gb Sandisk USB 3.0 sticks. One works perfect and the other is not recognized. I've reformatted it to NTFS, Fat32 and even tried to format...
Just tested this in our shop with 2 new machines. We can login with Supervisor from the op panel and not the WIM just like you said. Thank you!
Anyone else experienced this new issue? At setup if you leave the supervisor password blank at some point it changes itself. This does not happen with the admin password. It has happened before and...
Just a quick note if your customer is on Wifi make sure they are set to Private network not public. This has caused us a few headaches. We also create a local user account named "scanner" with a...
Unfamiliar with that model but on black and white machines they can have an issue with the developer drive gears stripping out causing no new toner from mixing into the developer.
Most of the machines will do this (Show"Cannot connect to DHCP") when the machine is set to DHCP on but not hooked up to a network. We usually remedy this by turning DHCP off and putting in a random...
Wasn't that discontinued in 2013? Just asking. As someone who has to download all the manuals and organize them at our dealership this would be amazing.
Not sure about the "scanner firmware to 70". I am not seeing that on the Ricoh website but you should install the SMB v2/v3 fix labled
SMBv2v3 - 4/4/2018 - D111-D142_SMBv2v3_SDcard
That...
The machines that i have seen the 20 days (New IMC series) don't have java by default. It is an option that has to be installed via a sd card.
ITB Belt / Cleaner