I have a HP 600 (M602) jamming. It seems to be stopping under the printer cartridge. There is about 300,00 prints on this printer. The belts and rollers under cartridge seem a little loose, old. Does...
Type: Posts; User: CorkyShark
I have a HP 600 (M602) jamming. It seems to be stopping under the printer cartridge. There is about 300,00 prints on this printer. The belts and rollers under cartridge seem a little loose, old. Does...
The mylar on the side door was out of position, about a 1/8th of an inch. Found out a technician before me replaced the side door and removed and replaced everything, including the mylar on the new...
I would make 1 double-sided copy..... it would feed into the duplex unit and down to the exit of the duplex unit and as soon as it enters the copier it stops and displays Jam 013. It is like the...
I replaced the exit sensor in duplex unit and the relay clutch, with the registration clutch. Still getting jam 13. I ended up putting another duplex unit on the machine from another...
The duplex exit sensor is on order. I will also order the relay clutch. Thanks for the advice. I will let you know.
I am getting a change in state on the exit sensor, but I will replace it. I will also check the wiring from the duplex to the back of the machine. Thanks for your advice.
I have a jamming problem. Jam 013 is (Duplex Exit 2: ON). The paper feeds into the duplex and feeds down and just as it is entering into the machine, the paper just stops and displays Jam 013. The...
Yes the itb does drive the cleaning unit. Thanks, I will do that.
I have an IRC 3380 that the spring in the transfer cleaning unit detached and curls up inside. Replaced cleaning unit and replaced one did the same thing. Has anyone seen this before?I did clean out...
It happens thru the document feeder and on the glass. Print jobs are fine. Entire copy is to dark. Has back ground on all copies and letters are to dark. If I go into manual exposer, I can lighten it...
Tried shading and sheet position adjustment did not fix. Replaced ribbon connector and contact image sensor unit,did not fix.
I did clean optics and under black cover when I did the drum replacement and developer. I went back today and I did test command 46-01. Copies are darker now, thank you very much.
Cleaned optics. Also made copies on glass with white paper on top, so I did not get a light leak. Did check hinge, was not broken. I will try shading adjustment, thanks
Thank you for the quick response. I will try that and let you know. Thanks
No to both questions.
I have an IR1023 with dark copies. The internal prints,reports etc. come out nice. When I copy them on the glass or in the document feeder, some letters are bolder then others and it has background....
I am working on a SF2116 with light copies. I replaced the drum, blade and developer. The copies are a little lighter now before the replacement. I did the developer initialization. The corona wires...
Thanks its_ just_a_copier.
The black rollers in the delivery assy have already been removed, I changed the settings in service mode, I bent the bracket a little bit so the gears meshed up better. I took out the orange roller...
I have a IRC3380 having intermittent Z folding jams. Jam codes are 0109 and 0110. Also the copies come out wavy. I did rebuild the fuser unit. Feed back will be greatly appreciated.
Does anyone have the part number for the 500-sheet letter/legal cassette? Canon LC3170
Okay it has been awhile but I wanted to make sure what I replaced fixed this *@*$n machine. I did try a new hard drive also; I think I forgot to post that. I just printed out the history on the...
Thank you SCREWTAPE.
The Tray Drive Assembly does not have a part number assigned in the Parts Catalog, however the number is available on e-support, Finisher- S1 Parts , Item # 301.. Does anyone have this part number....
I already updated the firmware. The Canon support # is there because I cut and paste the defrag method from the knowledge base on Canon's web site, because you stated what did I defrag? You said I...