The only time I have had this on this machine is when there is a high humidity content in the paper. It would every page would curl up in the output tray. I put in fresh paper and the problem went...
Type: Posts; User: driving lots of miles
The only time I have had this on this machine is when there is a high humidity content in the paper. It would every page would curl up in the output tray. I put in fresh paper and the problem went...
Brother had us check out one of these machines that the customer had bought at a big box store and it really had a bad smell. It was in a confined area. We reported back to Brother and I don't know...
On this old of a machine I have just swapped doors from another machine in our bonepile.
I would agree with the Hard drive or the M-Sata as the place to start.
Have you checked the SD card?
It has been a week and a half now with no blue lines. I found a blue gel pen next to the copier on a worktable and did training with the person who seemed to be in charge of the copier. She was...
I have been to this machine twice now Sharp BP-70C55 That is leaving a thin blue line when they do a two sided scan or copy. I have cleaned the upper slit glass and it goes away. Single sided...
We had another non working machine we pulled the board out of.
We had a 9310 that had the power interrupted during the update and we ended up replacing the Main PCB
I had been looking all over for this info in the service manual and elsewhere but couldn't find it. Even on the copier screen it does not this as an option. Thanks again.
Thank you that was the information I was looking for.
Our shop had a color pricing formula they used to determine the amount of color used on a copied or printed color page and would charge the customer based on a formula they set up for the price of...
My costs show 200.00 less to rebuild which includes one hour of labor. My main concern with these fusers is that the fuser belt wanders off to the side destroying themselves. Even on the brand new...
I found that in the latest parts book both fusers have the same part number for the complete fuser. However in the service manuals they are still showing different numbers? I have rebuilt one of...
I have not heard of contract toner for sharp in the US. Is this something new?
I noticed that there were no handy guides starting with the 70 series.
I would use a google search for a brother dealer in your area or go online to a site like (Precision Roller. In Stock for $289.95)
When the rear door is open the printer thinks it is printing an envelope. Envelopes print at a hotter temperature and slower than plain paper thus the fuser is bonding the toner better so no...
This will require a tech as there are no user options for this.
I did try that but it did not find the 9570
Thanks
I did try that but it did not find the 9570
Thanks
The difference between the N/V models is the different circuit boards (I was told it was a supply problem)
The others 0/1 were an upgrade with the 1 the later model, similar consumables but some...
I did see that when I googled it and the problem is I don't have access to the screen
Customer brought in a Brother MFC-L9570CDW and started a firmware update and then turned it off in the middle of the update. Now only the power button light comes on and does nothing, no fans no...
My employer has mentioned to me that the exit cabinets are impossible to get. We have had several trade-ins but they all had the inner finishers.