Our machine uses DV-011 but recently the price has been out of sight. I had talked to a former KM tech several years ago and he named off several developers that were, for the most part, identical to...
Type: Posts; User: cmitch
Our machine uses DV-011 but recently the price has been out of sight. I had talked to a former KM tech several years ago and he named off several developers that were, for the most part, identical to...
Thank you for your reply. I like the SR5060 since it will fold in half any size instead of limited sizes like our SR5040. You would think this application could be done on this machine especially...
Unfortunately ours is the SR5060. It will fold in half and staple any size I send it. I cannot find an option to fold the sheets together with no staples.
I need to print 1000 16 page booklets but not stapled. They will go through a finishing process that requires a small sticker sheet that will be stapled in off line. The booklet is designed to be...
We rarely run it anymore but when we need it, we really need it. I think part is about $125. I vacuumed out cleaning unit and whole area around sensor. No go. Still coding out.
Oh ye of little faith.
Checked SP5875-001 and it was set to 0. I changed it to 1. Exited service, attempted to print. Coded out again. Printer Fatal Error. SC410. Drum Potential Sensor Black....
It never gives me any alpha numeric codes. Just printer fatal error and the functional problem detected display.
This is a back up machine for our 7110EX that hasn't been much of a back up lately (7110EX down because K dev unit took a s^$t and waiting on part). I'm getting this error on Fiery E41: Printer Fatal...
Thanks blackcat. Developer unit and developer replaced. Settings run, counters reset and printing well.
I just removed all developer and reinstalled unit, started machine to get confirmation of motor direction. Counter clockwise as I suspected. It did not code out due to there being no developer to...
Thank you for your response. That makes a lot of sense. I’ll check that first thing in the morning.
Got this code after finally getting in a new drum to install. Buttoned it all up and whamo, there it is. Things I've done:
1. Made sure developer unit doesn't have a bow on bottom plate binding...
Discharge wire no doubt needs replacing. However, cleaning brush was replaced 200,000 copies ago.
Update:
The drum looks like hammered feces. Ruffles have ridges and so does the drum. 603,000 copies. I will replace drum when new one gets here before I go any further. We just ran 400 copies and...
As title suggests, when printing one side, the print is clean as a pin. When duplexing, lines appear at bottom of page (operator's side) in white area (see pics). When first seeing it, knee jerk...
It's Alive! Thank you for your input. It was power supply number 2, the one we guessed it was. Hytec repaired and we got it back today. Installed and back to normal. Hytec said there were several...
No. 2 is what we sent off to Hytec. Prepared to send off 3 next for noise filter replacement.
Is this compnent located on the dc power supply board or elsewhere? DC board pt number ends in 45200 and noise filter ends in 45400.
It's been just cutting itself off overnight. This morning it was off, we shut off main switch and then tried to power on and I get a tenth of a second PLEASE WAIT on the screen and I hear a click and...
Developer replaced, new bottle of genuine toner installed. Developer adjustment done for new developer and counter reset. Been running saddle sticth books all morning. All seems to be well. When I...
Update 1: Developer is now expired. Last bottle of toner in. This is a different brand. Generic. It has already outlasted any of the last 3. I have one bottle of pre fire OEM coming Monday and when I...
I’ve used 4 bottles of toner in less than 100,000 11x17 copies. No coverage. Just type. I have a much bigger issue than developer. It makes a lot of sense it is a toner issue because this is a...
No. Absolutely not. I know it screws with the developer and density settings. That is one good way to ruin developer. We had an idiot service guy reset all the settings counts. Drum, fuser web,...
I'm not really sure what this statement means. We regularly get 900K+ out of developer with no issues. Drum is 544,000 out of 1,000,000. I usually change drums around 750k. Very few last to...
So you're saying the toner that is in the pipeline now isn't 119,000 sheets yield at 5%? $179.00 a bottle???? Machine just stopped printing, telling me to exchange toner recovery bottle. It was full!...