My Epson Stylus Pro 7800 boots halfway and then freezes. Can anyone assist with what might be causing that? Thanks
Type: Posts; User: The Dancer
My Epson Stylus Pro 7800 boots halfway and then freezes. Can anyone assist with what might be causing that? Thanks
Hi Phil
Sorry but I think we're talking about two different machines. My fault entirely. I posted in the wrong thread initially and without sufficient details. The machine we've got is an Epson...
Boots halfway on display and then won't go any further.
Thanks for your response.
No error message on display.
Clarify software question.
We sell and service copiers but not much experience with Epson.
Epson Stylus 7800 Pro. Maybe in wrong thread. I'll delete and restart thread in other?
I have a Xeroc WYC-1 Scanner and Accxes controller with scan to file licence. Can anyone assist with set up instructions and password for web interface. Thanks
My Epson 7800 boots halfway and then freezes. Can anyone assist with what might be causing that? Thanks
I have an Oce TDS 400 that scans to printer but it wont scan to file. Anyone have a licence to enable that? Thanks
I've spoken with two Xerox techs who have come to work on our J75 and they don't have any idea how to tackle the registration issue. I've worked on many different copiers over the years - self taught...
Thanks for your response.
I've attached a page from the service manual - which has 2896 pages. Seems pretty clear. However information on how to adjust the registration is not. It's well out from...
Hi Phil
Yes, logged in as Admin - can't get to that point (Maintenance/Diagnostic) unless you do.
Machine is running fine - just lead edge and side edge reg way out on prints and copies.
I'm...
I'm needing to align lead edge and side edge registration. I've entered service mode, logged in, gone to maintenance/diagnostics and registration. According to the service manual I should get these...
Can anyone help with where I might be able to pick up this scan software. Old machine but works great. Just need to be able to scan to computer file.
Thanks
Good suggestion, thanks. Just done all that and still no improvement. Swapped the ops panel with the other machine just in case that was the problem, but both ops panels work ok on the other machine....
Thanks. All connections seem ok. Have tried cleaning the boot roms and ram as suggested by reprokev but no luck there either. I have a second 4080 machine with a fiery but it has major colour...
Thanks. Just tried that and now the LCD flicks on for about 3 seconds and then goes off.
Machine was running fine until moved to new premises. Touch screen activates when power is turned on but shows perhaps 5% travel in boot sequence and freezes. Lamp activates when ADF lifted.
...