Search:

The vertical line was due to a slight discoloration of the mirror at the exact spot, drum unit new, only a single blank vertical missing print from top to bottom about 2 mm wide.

Hello
I am working on a Lexmark MS310dn, it had a slight print defect due to the laser unit mirror mirror (long mirror in front of the laser unit) but was printing well except for a vertical missing...

Hello
I have a Canon IR 3225, I am getting light print on 2/3 top part of the page, its on copy and print as well. I have changed the drum, toner is full, cleaned the laser unit, all lenses, glass...

Hi
I have a client MS610dn printer, it had a vertical faded print. The toner and imaging unit OK, So I opened to check the laser unit and it had cockroach excreta in the unit and secretion on the...

Hello
I have a clients machine which be he bought in an auction.The machine need to input the account id to access functions. Is there any way to clear the stored ids so that can use the machine.
...

Hi
I am having an issue with a Ricoh MP1900 machine. Initially it used to power on and display SC542 and switch off by itself. As the code refers to the fuser, I removed the fuser and checked the...

Hi
I was cleaning a laser unit from a Lexmark E260 and a small part (see picture) has fallen out of the unit. I don't know if it comes out of the unit or not. The printer was printing OK with a...

Hello friends,
I'm getting the same error message.My machine has firmware date code 20150218, Firmware revision 2304070 439646, Bundle version,3.4.1.
From this datecode my machine firmware version...

I replaced with new toner, same result.

Hello
I have a bizhub 282, on powering on it displays PLEASE WAIT, and does not proceed any further. Onpowering on it makes some noise - normal turning of parts noise, fuser is heating.

Any idea...

Hello
I have a sharp AR 5516 copy machine and getting F2-40 error code.
I have checked the toner motor, its working, i manually filled the developer unit with toner, but i'm still getting this...

Hi everybody
Can anyone indicate me where the registration switch is located on the Kyocera KM 1650 machine. I am getting misfeeds and JAM 11 on the machine.

Thanks

Thanks for the tip.
I swaped the laser yellow and cyan. The problem is still the same, so I guess the problem is not with the laser, and asthe print defect repeats itself, I think it must be a...

Dear Friends,
I have an HP 4700, I am getting horizontal white lines with the Cyan cartridge, I've already changed several cartridges without any effect, also changed the ETB. I guess the problem is...