Thank you. That makes since.
Type: Posts; User: clark
Thank you. That makes since.
I have a sharp mx3050 copier. The machine jams at the registration roller assy. It does throw up a code. But they have been clear out. It does this thru out the day. No jam. Just feed the paper up to...
Is that the unit in the middle that slides out. thanks
I dont need a service manual.
where is the motor to check at. Thanks
I got a customer with this machine and it say print engine subsystem fault 8-311. and all i read is that it the regestration sensor. I cleaned with not luck. Thanks for any help of this.
I got a brand new sharp mx-m2630 that i just delivered and it gives me the code h4-02, i replaced the thermistor and still the code. the machine only has 1000 pages on it. could i have a bad...
Does update the formware erase the customer on scanning
Does anyone know the version of firmware this machine should be updated to. now i have 7.7 on the machine.
I dont know but can you use a sharp mx-609fb in a sharp mx607fb. I got a lot of bad fuser here. Thanks
I dont know but can you use a sharp mx-607fb in a sharp mx609fb. I got a lot of bad fuser here. Thanks
i unpluged all options and no luck. thanks
I replaced the hard drive and up and running. yea
I drop off this machine. and customer says that they cant use the setting button. all it says is please wait. i replaced mfp program and no luck still no setting will come up. all other buttons work....
I got a sharp out there. And the machine is dead. no light any where. im thinking power supply? any help would be nice. thanks
I know someone has to have the fix here. I got this machine in with the finisher. I turn it on and it say finisher jam. Nothing there. If i get past there i get the f1-16 code. I have a customer...
I just got a machine from wholesaler. sharp mx-m365. Right above the fuser unit is a paper guide. 1 roller assy and 1 switch. Sharp does not sell that part as a whole unit. No 901 number. So looks...
I just got this machine in. only 19k. toner levels dont show up. says no paper output tray. adf does not show up and the second tray does not show up. sent logic board to hytec and they said to ship...
So i cant do update. Is the ssd the very small board on the mfp board. Machine has multi problems. Adf does not show and the extra tray does not show. And the toner quantity does not show on display....
thanks. I will give that a try.
Machine just locks up trying to do down load. You hit the firmware list from the drive but the machine never starts the download. Also the toner dont register on the dipsplay. Machine just acts like...
Just got in a mx3050n. I cant do a firmware download. machine also say no output tray allowed. does not see second tray or the adf. Im thinking the main logic board is needing to be replaced. Just...
Thanks. I do see it. I have ordered it thru sharp.
I have searched the manual for the fuser cooling fan. Its making noise. Does any one have the part number so i can order it. Thanks
I have a customer with the toshiba E Studio with a service code F-070. Can someone help with the resetting of this machine. Thanks