Hi, we have iR-ADV C7260 we trying to use the Multi-purpose tray but keeping getting Registered size differs from the guide with adjust guide with have have, tried paper size auto but it does not...
Type: Posts; User: QC91
Hi, we have iR-ADV C7260 we trying to use the Multi-purpose tray but keeping getting Registered size differs from the guide with adjust guide with have have, tried paper size auto but it does not...
Thank you for the help it worked Copier/option/cs1/P-sz-c1. 0 is A4, 1 is B5, 2 is LTR
56486
Hi, our C7260 is stuck on paper size A4 for Drawer 1 and 2 we can't change it
Thanks
Thanks everyone for the help we installed new full toner and it works
Hi, we had to do partial refill on the Canon GPR-33 Magenta we have new toner coming but it's been delayed it has about half filled but the replace toner message says on
Thanks
Hi, we keep getting jam error STNRY Vertical Path Sensor 1 PS53 only with 11x17 paper any help would be appreciated
Hi, are office is looking at getting VarioPRINT 115, but we got different answers on Print Engine and Controller System Options are office does all PDF Print jobs 400 to 1200 pages each job. one...
Hi, we need the system software for our imagePASS A2, but can't find part number or dealer that sells it
thanks
4354543547
Thanks guitar9199 for the reply I checked the Printer Properties, I have we have the Staple Finisher-K1 with Puncher Unit and Paper Folding Unit-G1 will attach screenshots we have SNMP status enabled...
Hi, Thanks for the help the only option I have is Z-fold we using 11x17 with UFR II Driver
43513
We have iR-ADV C9270 Paper Folding Unit-G the office need help with 11x17 Z-fold, were printing via Adobe PDF with UFR II Driver Windows 10 64-bit, the problem we got is the Z-fold is the wrong way ...
Thank you for all the help it looks like the OS is the problem, I disconnected the hard drive and turn on the A2 and I get 00 on the LED, we don't have the System Software
Thanks do you have setups on how to do this Sorry have not worked on a imagePASS A2
Thanks
Thanks teckat for the help tried everything you recommend but still the same error his photo of the LED
43450
our office is trying to setup CANON imagePASS A2 Part number 45109477 with a C9270 Pro printer but we keep getting error code AA on the LED everything it hookup any help would be appreciated
thanks for the help i really appreciate it
our office just received iR-ADV C9270 and it's missing screws to mount the imagePass A1 to the mounting bracket and Bracket and Silencer Cover, can someone tell me the part number for them or...
Thank you for the help the electrician was talking about using Buck Boost Transformers 500SV46B - TRANSFORMER DRY 1P .5KVA 120X240V-16/32V | Schneider Electric
Hi, Thank you my electrician told me this "Ok well that's still not very clear I just want to make sure it will operate ok on single phase 240 volt power Because there is no such thing as single...
I just wanted to confirm the iR-ADV C9270 PRO power requirements is for single-phase 220V? we have electrician installing a new outlet and said some of the 220V equipment require Three-phase
...
I have a service manual can you tell me the page I should look at? it's 1700 pages long and can't seem to find " set print jobs to continue after error "
Thanks, Phil B we are using UFR II, we can't find set print jobs to continue after error can you give me instructions, please
Hi, I office just received an iR-ADV 8505i, and we noticed every time we have a jam error we lose the print job and have to look for the page in adobe and start a new job, we have 8205 and it does...