Search:

Type: Posts; User: Hoosierdaddy

Page 1 of 7 1 2 3 4

Search: Search took 0.04 seconds.

  1. Toshiba E-Studio 3040c Hard Drive Error

    I am needing a HDD. Is there a Software Package that has to be done to get it to work in the machine? Error F510 Code

    Thanks Hoosierdaddy
  2. Replies
    3
    Views
    356

    Ricoh IM 2500-5000 Sc 142-12 Code

    Anyone having SC142-12 Codes coming up? There is a Bulletin that came out that said they were working on a Resolution but havent seen anything yet.

    Thanks Hoosierdaddy
  3. Replies
    1
    Views
    427

    HP T1700dr

    The machine is acting weird. Put a full set of HP Inks (standard capacity) Says Incompatible ink cartridge (all 6 Cartridges) It is also saying to replace the middle Print Head (which i have...
  4. Thread: HP T730

    by Hoosierdaddy
    Replies
    5
    Views
    1,090

    Re: HP T730

    Thanks for the Reply. There is a border on the prints. Also when i printed a Test print out of memory it didnt print it from border to border on 36 inch paper. should it?
  5. Thread: HP T730

    by Hoosierdaddy
    Replies
    5
    Views
    1,090

    HP T730

    Prints some documents in wrong direction on paper. Could this be caused by the Print Driver? It has also printed like 2 inches of a blue print and stopped printing. Customer will have to unplug...
  6. Replies
    1
    Views
    596

    Xerox 6510 Error 116-365

    Any Ideas how to fix this issue. Does it need a HDD or can it be reformatted?

    Thx in Advance
    Hoosierdaddy
  7. Replies
    2
    Views
    509

    Sharp MX-6580 Black Lines

    Would someone be kind enough to let me have access to the Service manual for this machine? This machine has black lines on it and it still has 70% left on its life.

    Thanks in advance
    ...
  8. Replies
    6
    Views
    495

    Re: HP Z9 Plus Will Not Cut Paper

    After a closer inspection of the Cutter, the latch was broken off of the cutter assembly... Thanks
  9. Xerox Workcentre 7855 FUser System error Message

    The Customer has replaced Fusing Unit. Is there a procedure to resetting the Error? And if so is there a procedure to Reset this error Said there wasn't any specific Error Code on the machine.
    ...
  10. Replies
    2
    Views
    526

    MP 6002- 7503 Machines

    Have 2 Separate Machines Running Light even after Replacing Developer and DV Unit. Did Tech Bulletin About Exhaust Fans Ect. Any Suggestions?

    Thx
    Hoosierdaddy
  11. Replies
    6
    Views
    495

    Re: HP Z9 Plus Will Not Cut Paper

    [QUOTE=Kiran Otter;2350243]There's no adjustment. Make sure you can push the carriage and engage the cutter by hand. It could be the 'hook' on the carriage is broken off

    Thank You
  12. Replies
    6
    Views
    495

    Re: HP Z9 Plus Will Not Cut Paper

    I've taken out the cutter and it seems to be ok. Could the carriage not be going far enough over to engage? Is there a adjustment for the travel of the carriage ?
  13. Replies
    6
    Views
    495

    HP Z9 Plus Will Not Cut Paper

    After completion of a print job the carriage goes to the left but the cutter doesn't attach to the carriage to cut the paper. Any suggestions or reason it wouldn't do it?

    Thanks for Input
    ...
  14. Replies
    6
    Views
    10,950

    Re: Lanier Pro 8200s

    Thanks for the reply. I will check that out!
  15. Replies
    6
    Views
    10,950

    Re: Lanier Pro 8200s

    Thanks for the tips, the fusing unit is new. I will check the coupling Drive gears
  16. Replies
    3
    Views
    460

    Re: Xerox 6655

    The Top 4 Lights are Yellow and the bottom 4 are green if that helps solve the mystery.

    Thanks
    Hoosierdaddy
  17. Replies
    6
    Views
    10,950

    Re: Lanier Pro 8200s

    I am Trained on the machine. it is being fed LEF and is is letter sized paper and regular 20 lb paper Its as if the fusing unit wasnt rotating and after closing the transport section firmly it got...
  18. Replies
    6
    Views
    10,950

    Lanier Pro 8200s

    It was jamming (J082) and wouldnt stop, released the transport levers and reseated transport section with some force and the machine made a pop pop noise and started working. It has done this twice....
  19. Replies
    5
    Views
    1,253

    Ricoh MP 6002 Paper Tray Reset Message

    There isn't anything behind the Tray, would this indicate the lift motor is defective or a sensor out of whack? Or is there a reset for this message?

    Thanks

    Hoosierdaddy
  20. Replies
    2
    Views
    375

    Re: HP Z2100 Paper Wont Load

    Kiran,
    Thank you so much that is exactly what the issue was. Thanks again!!
  21. Replies
    2
    Views
    375

    HP Z2100 Paper Wont Load

    Replaced Drive Belt. Machine will not load Paper. When trying to program the settings in the paper menu the paper roll portion has a lock symbol when trying to select Paper roll / Sheet. Is there...
  22. Replies
    3
    Views
    460

    Xerox 6655

    Machine is not going thru Inital. Has green light on and gets so far and starts over. Is this the Hard Drive? If so is the hard drive hard to replace and is there steps to do after replacement?
    ...
  23. Replies
    9
    Views
    1,493

    Re: Ricoh MPC307 SC672-00

    Its the Control Board Needs Repaired or Replaced
  24. Thread: HP T 930

    by Hoosierdaddy
    Replies
    1
    Views
    402

    HP T 930

    All the Ink Cartridges have expired Expiration Dates. Is there a way to use them with this condition? Firmware Ect??

    Thx

    Hoosierdaddy:confused:
  25. Replies
    0
    Views
    201

    Epson tm-s1000 check scanner

    Looking for parts for this unit feed rollers and franking rollers. Model m-236a

    thanks for any help or suggestions
Results 1 to 25 of 166
Page 1 of 7 1 2 3 4