Ah ok, thanks. I don't see anything in the manual on disassembly/removal. Pretty straightforward once you dig in there?
Type: Posts; User: sandersdad72
Ah ok, thanks. I don't see anything in the manual on disassembly/removal. Pretty straightforward once you dig in there?
Is everyone talking about the Process Tray Unit when describing the Assist Unit?
Ok, machine is fixed. After replacing the clutch in the fuser drive unit and getting fuser rotation back, H3-02 remained. Started thinking what was said about the drive gear being worn. Visually...
Thanks for the feedback! At this point going to dig into the connector, possibly harness and see what we get, fingers crossed.
I did flash it to 8.00, and also I found the clutch was bad in the drive unit causing no fuser rotation. Replaced the clutch and verified fuser rotation but the H3-02 continues. And I did follow...
Trouble cancel won't clear unless I cancel 2 or 3 times in a row. Then when it finally cleared I tried an internal print and paper stopped at the registration and it threw an L4-12, 2nd transfer...