Search:

hi. i have some trouble with c4050i. on start up i have 40c3 and after a while i have 6102. cannot enter to serwice mode. cannot make trouble reset. i have a menu of TR but not working and cannot get...

hi. this is a good method. u can do it faster if you like. u cam have to input a password to enter to service mode. on video they don't have pass on service mode. password can be 9272927292729272 ...

here you have

https://rapidshare.io/169v/YSoft_Card_Reader_Tool.rar

try to change dimm memory if you can. for me is problem with dimm memory. dimm can be inside the board and is not changeable

how You format HDD if you don't know your CE password? buy new hdd then use initialization tool. after make a procedure from service manual and ce pass will be reset to default.
if you are not a...

noo only c220 series and 223 series have that same dimm

try to change dimm memory. it's help me

hi. upgrade the firmware. this helps you

use this firmware. it help me

A7AH0Y0-F000-GC2-K7-990

you can do a data initialization from pendrive ane password will be standard

powder its that same only plastik elements can be a problem

turn off hdd and make data error clear. then change hdd and install it

for me yes. that same

look for this firmware A7AH0Y0-F000-GC2-K7-990-CHECKSUM-b131

i have that issue in b/w 227

missing SATA Controller..

Bizhub C308 C368 error code C-D011

i have it. thx

hi. looking for initialization tool to d250 c308. it's a a789be.tar but i dont have it because i lost my hdd with all firmware PMs and init tools. send me on zoool1987@gmail.com

u must change lamp i fusing. this is all

1-4gb usb 2.0

make DATA CLEAR i service mode.
put pendrive with firmware to board socket usb 3.0 . dont use front usb.
write recovery sata controller to machine. not always is working i dont know how..
when...

update SATA Controller TNEU1600101EN_3.5.pdf

4921749217

i have same issue in c308 and this helps me a lot

try CLEAR ALL DATA in service mode.

i mean a part of firmware is a SATA Colntroller. i have done this ane i rewrite firmware on GC4-28 and i have it in firmware but after reinstall on newest firmware i have MFP n.g....
after install...

hi. i have machine with error fa17 and missing sata controller. someone have this controller or how to find it on infohub.
greetings

4 me you need to update SSD board to 6.05 then try to write firmware. dont change enything i have this issue few days ago.
my machine is working then my boss try to upgrade firmware and mfp...