Hello,
Is there anyone who has experience with ldap via ssl
I can’t get it working
Regards,
Youri
Type: Posts; User: joe_vanacker
Hello,
Is there anyone who has experience with ldap via ssl
I can’t get it working
Regards,
Youri
Hello,
does anybody know how to set the default logout time in Kayleigh?
by default its 90 seconds.
thanks!
Hello,
we frequently have sc672-11 error.
when we reboot the error is gone for a while.
what could cause this error? could it be the memory?
regards,
Youri
Hello,
does anybody know how to set the default resolution for kayleigh scan to me?
i changed it in the webpage op the machine but without result.
you can change the settings once you are logged...
Hello,
with the extended lan card there is no default gateway. is it possible to change this so there is a default gateway?
regards.
Hello,
does anyone have an image for the msata of an mx4070N.
would be very helpfull! :)
Thanks
Can you tell me what you changed on the finisher harness (where, what?)
Thanks for the reply,
fw is up to date .
problem occurs only when printing from outlook (server2016 office2016).
i have a problem when printing from citrix with an ps driver that the colors are inverted. mx-3071- mx-6071
with windows photo app and also in adobe reader.
when i print as an image it works.
did...
the latest fw is installed?
i guess that you are not using original sharp toners.
There is a mod for the rollers just above the fuser unit. Check if the gap between the rollers is not to big. Otherwise install the modification
Verzonden vanaf mijn iPhone met Tapatalk
Hi,
does it jam before it gets in the fuser? if so i would check the gear on the belt unit NGERH1668FCZ1
regards
if you have a finisher installed, you do not have a shifter motor installed.
when testing the machine without the finisher the machine would give l4-11 error, with the data 7 on 1 you can test the...
Can you check sim 55-01 swn24 data 7 is 0?
hi,
yes i saved it as a preset, i will try it with a different printer and get back to you.
i've tried it with different mac's and they produce the same issue.
regards,
youri
Thanks for the reply,
i have done all of the above, but the problem remains.
when i open adobe and i don't click through to the driver options of the printer, he does not authenticate or use job...
Hello,
does anybody have experience with pdf printing from mac?
i have a problem when i want to use authentication or job retention in adobe products.
when i open a pdf file and i print it...
hello everybody,
We have a problem with a mx-5070 who gives pod3_n errors every +-400 pages.
the right exit unit is used and it is printed simplex.
does anyone have experience with this error?...
hi,
is it possible to post this special fw?
Regards,
Youri
thanks!
How can i enter the sp mode for a mpw6700?
thanks for the reply but this machine has no sd or a hdd on board..
in this version there is no hdd or sd card