Search:

I hope this link works for you: https://downloads.lexmark.com/webcontent/kbase/downloads/winbidi.exe

I was able to upload the firmware for ADF and Finisher, the only part that failed was MFP controller, see pic. I also reformatted the USB-stick and re-wrote the firmware into it. Any thoughts?

#$!*@!!!, called it too early! Got this message: MFP controller Download N.G.

Did I get the wrong firmware? Maybe I should try some older versions of the firmware? If so, can I get access to the...

Yes, that's it :)

Hi all

I have a C450i at hand, the machine's memory card/SSD was wiped clean and won't boot up. I obtained firmware from a local contact, AA2J0Y0-F000-G00-Q8. I was told to put the entire folder...

I called Lexmark support a few days ago, and was given instructions to revive the machine. I needed to download a utility called Winbidi.exe. Under Windows, by giving command to the machine through...

Any suggestions how I can proceed under the remote console?

Looks that the main board is screwed. Tried every possible key combination to start up the machine to no avail. The machine insists on booting into recovery mode.

I was able to to telnet into the...

How do I get into Assistance mode? The machine gives me 2 choice, USB recovery and Network recovery, but I don't have the service manual, so it's difficult to proceed.

Hi

I've flashed my CX820's firmware to the latest version, CXTPP.221.204, but now the machine only boots into Recovery Mode, nothing else comes onto the display. Any suggestions how I can get out...

Turned out that the cable to the finisher bridge motor was disconnected. Should have read the error code and started from there, but you live and learn. :)

50354

Hi guys

I just ran into an intriguing issue. I got 3 A-FN07 booklet finishers to pair with Alatalink C8035 and C8070 machines. After some testing, I found that all these finishers work with C8035...

A few helpful members of this community helped me out, thanks guys, much appreciated! The solution:

1. Introduce image into the SD-card
2. Apply the full version of the firmware. This part still...

I checked one SD-card from a computer which has SD-card reader, voila, the SD-card is blank! So it looks that next step would be to hunt down the SD-card formatting tool and firmware. Anybody willing...

I took a photo of the HDD and SD for C8070, maybe the required software should be the version show on the HDD?
49964

You are absolutely right. The size of SD-card for C8070 is 8G, the rest are 4G.

We have 3 C8035s and 2 C8970s, I'll take a look at the SD-cards tomorrow. Thanks for your advice! Cheers!

Sorry if I sound needy, suppose I could get these files, what tools do I need to apply them to the SD-card? Also, I just heard from a guy, saying that the machines may need the earliest version of...

Thanks for the quick response. Is there anyway I can put sd-card image without Xerox-tools? I'm not an Xerox engineer.

Hi guys

I am a long time but quiet member of this forum, this forum has helped me countless times, thank you very much!

Now I have at hand 5 Altalink C80xx machines, with wiped HDD and SD-card....